TRX250r.org

Author Topic: connecting rod size info  (Read 2681 times)

Offline rsss396

connecting rod size info
« on: September 07, 2013, 10:51:38 AM »
If you need rod sizes for a custom motor build here is a couple links that give you the specs of differant rods out there

http://www.wiseco.com/PDFs/RodSpecs.pdf

 Pro-X stuff here: http://www.pro-x.com/downloads/technical.pdf    (Rods start on p.50-52)


hot rods  http://www.hotrodsproducts.com/ProductInfo.aspx?cat_id=15
« Last Edit: September 07, 2013, 12:53:55 PM by rsss396 »
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38