TRX250r.org

Author Topic: Alternative Rear brake Caliper??  (Read 30600 times)

Offline pressure262

Alternative Rear brake Caliper??
« Reply #75 on: April 10, 2016, 11:58:00 AM »
Langbolt anything yet with these conversion brackets?

Offline Langbolt

Alternative Rear brake Caliper??
« Reply #76 on: April 11, 2016, 09:09:58 AM »
I've been meaning to Take the bracket and design it up in 3-D Autocad and send the file to Jeremy Nelson - Nelson Precision Manufacturing & see if he would be interested in making the brackets that would bolt up to the 250R standard Brake support and allow the CR twin piston brake caliper to be used.....I should have some time soon to do this.....stay tuned.

Offline Pontas

Alternative Rear brake Caliper??
« Reply #77 on: August 03, 2016, 07:47:18 PM »
Quote from: Tbone07;25432
Look no further my friend

450R Rear Caliper - Any Year
450R Brake Stay - Any Year
450R Disc Hub - Any Year
And 450R brake disc of course
2 washers to space out caliper (see picture)
OEM 250R locknut will work

I think the whole operation cost me $125 at the most

Front and rear, do the 450R brakes fit the 250R right away?

Offline jcs003

Re: Alternative Rear brake Caliper??
« Reply #78 on: March 30, 2018, 06:57:53 AM »
Bumping this up.

I will be trying the YZ caliper as I did back in the day.  I will keep you all posted.

Offline jcs003

Re: Alternative Rear brake Caliper??
« Reply #79 on: March 30, 2018, 02:42:08 PM »
I got this: https://www.ebay.com/itm/yz125-yz250-front-brake-caliper-yamaha-oem-2005-2018/192455448779?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

this is the same mount as the yz400 caliper on my 250r.  some machining is needed.  FYI; 250r calipers are going for $250-300.  F that.
john

Offline hickwheeler

Re: Alternative Rear brake Caliper??
« Reply #80 on: March 30, 2018, 02:45:12 PM »
I got lucky and picked up a NOS one for 35
« Last Edit: March 30, 2018, 09:57:34 PM by hickwheeler »
88 330 worked over by Pete
88 ct350pv (BOF Build)
89 440 Packard built pilot  (Sold)

Offline rablack21

Re: Alternative Rear brake Caliper??
« Reply #81 on: April 09, 2018, 12:58:15 PM »
Iím using the full 450r setup with the exhaust spaced over some. Works great and cheap. Also Glenn innovation makes a caliper bracket to use with 450r caliper and rotor without any other mods needed. Something to consider.
http://www.glanninnovations.com/Products.html

Offline jcs003

Re: Alternative Rear brake Caliper??
« Reply #82 on: April 10, 2018, 06:33:46 AM »
looks like it puts the caliper very far to the rear.  is this true?

Online Burns363R

Re: Alternative Rear brake Caliper??
« Reply #83 on: April 10, 2018, 07:24:53 AM »
Iím using the full 450r setup with the exhaust spaced over some. Works great and cheap. Also Glenn innovation makes a caliper bracket to use with 450r caliper and rotor without any other mods needed. Something to consider.
http://www.glanninnovations.com/Products.html

Im using this same setup.  I wish it wasnt rotated towards the back so far.  I am unable to run 1 of my pinch bolts for the rear carrier.  But it is nice having a 450r caliper rolled back.  Just needs to be about 1/2 way between stock and where Glann has it.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 363R 86- Stock frame(gusseted),KOQ-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, CR Ignition

Offline rablack21

Re: Alternative Rear brake Caliper??
« Reply #84 on: April 10, 2018, 09:17:36 AM »
I didnít think about that Kyle, but thatís a good consideration. I could technically make those brakes if people were really interested. For now, my 450r set up is working well. I just spaced my silencer out so it wouldnít hit the caliper.

Offline jcs003

Re: Alternative Rear brake Caliper??
« Reply #85 on: April 10, 2018, 10:24:19 AM »
I didnít think about that Kyle, but thatís a good consideration. I could technically make those brakes if people were really interested. For now, my 450r set up is working well. I just spaced my silencer out so it wouldnít hit the caliper.

all that is needed is a new bracket cut on a laser.

I am just slotting the holes on my 250r bracket and clearancing the  yz mount.

Online Burns363R

Re: Alternative Rear brake Caliper??
« Reply #86 on: April 10, 2018, 10:27:47 AM »
I didnít think about that Kyle, but thatís a good consideration. I could technically make those brakes if people were really interested. For now, my 450r set up is working well. I just spaced my silencer out so it wouldnít hit the caliper.

Where is yours located?  Mine is rolled so far back that it wont hit the silencer or anything. 
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 363R 86- Stock frame(gusseted),KOQ-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, CR Ignition