Author Topic: Hello 250r.org (Read 4476 times)

The norm · « **on:** August 06, 2015, 02:03:52 AM »

I'm Loren. I have an 86 310r with some of this and some of that. Glad to be here. Hopefully I will be able to gain some of your knowledge.

Skeans1 · « **Reply #1 on:** August 06, 2015, 09:19:04 AM »

Hey Loren good meeting you yesterday, throw a few pictures up of your bike. Jared

havinnoj · « **Reply #2 on:** August 06, 2015, 11:05:03 AM »

Welcome Loren!

The norm · « **Reply #3 on:** August 06, 2015, 11:47:04 AM »

I think I finally have it running the way it should. Thanks to skeans1 for the help. I owe you a box of beer!

sameltoe · « **Reply #4 on:** August 06, 2015, 01:07:31 PM »

Welcome aboard!

rablack21 · « **Reply #5 on:** August 06, 2015, 01:26:33 PM »

Welcome to the site, Loren. You are in good company. Don't be afraid to ask questions and jump right in. There are lots of R lovers here.

The norm · « **Reply #6 on:** August 06, 2015, 01:46:03 PM »

I've been on the other forum for awhile and skeans1 suggested that I join here. I'll add info on my signature later. I basically have a 310 that I want more out of. It's a dune only bike. I look forward to an information overload.

etccb · « **Reply #7 on:** August 06, 2015, 05:08:22 PM »

Very nice looking R

Pumashine · « **Reply #8 on:** August 06, 2015, 05:25:27 PM »

Welcome aboard. Jared seems to know what he is talking about:rofl: Its nice to have some more west coast guys on here. I ride Winchester at least once a month, sometimes 2 or 3.

hickwheeler · « **Reply #9 on:** August 06, 2015, 05:55:15 PM »

welcome aboard. Hope to see you out in the dunes.

The norm · « **Reply #10 on:** August 06, 2015, 08:14:00 PM »

I'm planning a weekend trip to Winchester September 18-21. If you want or can come on out. My son has a break from college and is chomping at the bit to get out and tear up the sand.

The norm · « **Reply #11 on:** August 06, 2015, 08:15:33 PM »

Thanks. It looks good but is giving me plenty of trouble. I'm taking the motor in to possibly get the bdt dune port fixed

Pumashine · « **Reply #12 on:** August 06, 2015, 08:53:24 PM »

Quote from: The norm;56860

Thanks. It looks good but is giving me plenty of trouble. I'm taking the motor in to possibly get the bdt dune port fixed

Dune port? Is that where they can't see over the edge so they just push as hard as they can with the dremel to make it look like something was done to your cylinder?

Skeans1 · « **Reply #13 on:** August 06, 2015, 10:18:55 PM »

I didn't look in the exhaust port last night but who knows what was done in there.

croat1 · « **Reply #14 on:** August 06, 2015, 11:03:55 PM »

Welcome Loren!!