TRX250r.org

Author Topic: New Project: YFZ/Banshee Hybrid  (Read 34385 times)

Offline broken1

New Project: YFZ/Banshee Hybrid
« Reply #15 on: January 15, 2016, 05:50:11 PM »
Back in the 90's Motofast made two into one intakes & pipes for the banshee. I seen a couple of them at the dunes with these setup's years ago. Sounded very unique.

Offline jcs003

New Project: YFZ/Banshee Hybrid
« Reply #16 on: January 20, 2016, 04:27:23 AM »
Some updates:

Got the pipe modified.  needed to remove 3/8" to clear a couple of things.
I also ordered a swingarm from tyson racing.  it will have 04 YFZ geometry with a full pivot tube like on a banshee.  I will post pics when it arrives.  I should have the motor mounts in very soon.


Offline jcs003

New Project: YFZ/Banshee Hybrid
« Reply #17 on: January 20, 2016, 04:29:37 AM »
I believe the lt250r radiator will work best.  I just need to perform a few mods.


Offline Burns363R

New Project: YFZ/Banshee Hybrid
« Reply #18 on: January 20, 2016, 07:36:21 AM »
This will be a very cool bike.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, 200w OEM Ignition

Offline etccb

New Project: YFZ/Banshee Hybrid
« Reply #19 on: January 20, 2016, 10:06:38 AM »
Looks like it will be a fun and cool quad.

Offline jcs003

New Project: YFZ/Banshee Hybrid
« Reply #20 on: January 20, 2016, 11:31:15 AM »
Quote from: etccb;63449
Looks like it will be a fun and cool quad.

Yes, imagine a banshee engine in a chassis that works well...

John
« Last Edit: March 24, 2016, 07:47:57 AM by jcs003 »

Offline hickwheeler

New Project: YFZ/Banshee Hybrid
« Reply #21 on: January 20, 2016, 01:31:43 PM »
Nice to see you making progress.
88 hybrid 431 puma
88 (BOF Build) stock motor and oem 89 plastics
More in the works

Offline rk88r

New Project: YFZ/Banshee Hybrid
« Reply #22 on: January 20, 2016, 03:59:17 PM »
Lt radiator huh? I've read that raptor rads are a close fit also.
\'99 Laeger narrow, cr link, +3+1 protrax, Peps, with a LED 363
\'88 265 pv peps
One other \'88

Offline jcs003

New Project: YFZ/Banshee Hybrid
« Reply #23 on: January 21, 2016, 04:30:10 AM »
Quote from: rk88r;63468
Lt radiator huh? I've read that raptor rads are a close fit also.

Quite possibly using the LT250r rad.  I am also considering a custom built.

john

Offline Langbolt

New Project: YFZ/Banshee Hybrid
« Reply #24 on: January 21, 2016, 10:40:02 AM »
Why won't the Stock YFZ Radiator work ?

:)

Offline rk88r

New Project: YFZ/Banshee Hybrid
« Reply #25 on: January 21, 2016, 04:07:47 PM »
Moving the rad makes more room for the pipes.
\'99 Laeger narrow, cr link, +3+1 protrax, Peps, with a LED 363
\'88 265 pv peps
One other \'88

Offline jcs003

New Project: YFZ/Banshee Hybrid
« Reply #26 on: January 22, 2016, 06:52:28 PM »
Quote from: Langbolt;63496
Why won't the Stock YFZ Radiator work ?

:)

I have a YFZ rad and would need to offset it 1".  I am just want to make this as clean as possible.  I could be overthinking this.  especially because the YFZ rad location is perfect for airflow and CG.

I will take a pic with in its approximate position so i can get feedback.

john

Offline jcs003

New Project: YFZ/Banshee Hybrid
« Reply #27 on: February 04, 2016, 06:45:04 AM »
New swingarm from Tyson racing


Offline jcs003

New Project: YFZ/Banshee Hybrid
« Reply #28 on: February 04, 2016, 06:46:42 AM »
installed.


Offline hickwheeler

New Project: YFZ/Banshee Hybrid
« Reply #29 on: February 04, 2016, 04:57:01 PM »
Cool starting to come together
88 hybrid 431 puma
88 (BOF Build) stock motor and oem 89 plastics
More in the works

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38