TRX250r.org

Author Topic: Rear rim recommendations for flat track  (Read 4149 times)

Offline 250rchris420

Rear rim recommendations for flat track
« on: August 22, 2016, 01:30:43 PM »
Got sucked into flat track now haha what's a good rim and tire setup to use on the 250r? I'm going to keep the front knobbys for now just want to get the rears taken care of.

Offline The_Steve_Man

Rear rim recommendations for flat track
« Reply #1 on: August 24, 2016, 07:34:21 AM »
Most guys running ft are using Hoosier or American Racer 18x10-10. Not sure what width rims they run.

Sent from my MotoG3 using Tapatalk

Offline 250rchris420

Rear rim recommendations for flat track
« Reply #2 on: August 24, 2016, 09:11:33 AM »
I see alot of 10" setups I was thinking of going trying a 8?5" tire. I'm a light guy at 130lbs I think the 10's might bite a little to much in the corners but I will keep it in mind. Thank you.

Sent from my Nexus 6P using Tapatalk

Offline The_Steve_Man

Rear rim recommendations for flat track
« Reply #3 on: August 24, 2016, 03:15:17 PM »
They also have 18x8-10. 10x8 rim. May do better with a 8" wide tire.

Sent from my MotoG3 using Tapatalk

Offline FerrinMotorsports

Rear rim recommendations for flat track
« Reply #4 on: August 25, 2016, 02:11:32 PM »
Personally I would start out with 18x10x10 tires, Brand of your choice, and 10x10 wheels.....They are going to work the best on a variety of track surfaces....I only use the 10x8 combo on a certain type of blue groove track....10" everywhere else....

Offline 250rchris420

Rear rim recommendations for flat track
« Reply #5 on: August 25, 2016, 10:54:15 PM »
Great thanks for the help guys should be tearing up the track next race. Just gotta get my carb dialed in for the change in elevation.

Sent from my Nexus 6P using Tapatalk

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38