new carb or stay with stock kehin

[Anything2stroke]

what are your guys recommendation for a carb to replace the stock kehin? or should i rebuild it,or get a lectron

[sameltoe]

38 air Stryker or 38/39 pwk seems to be the hot ticket. Unless you go smartcarb, which a couple of people have had good luck with.

[jcs003]

38 pwk air stryker.  i hear of more issues with the smart carb than without.  I have a 36 mm smart carb if you are interested with 3 metering rods.  it never seen off road.

john

[Anything2stroke]

hmm ok, were do i look for carbs? pwk or mikuni 38/39?  john ill still be looking around

[thesmith87250r]

Dont forget the tm or tmx  carbs

[rablack21]

38mm sir striker is the basic standard these days. If you are purely woods riding and bone stock, some guys will opt for a 36mm air striker. If you got the extra money, take a look at a technology elevated smart carb.

[thesmith87250r]

Check old posts on that dumb carb
 Not for everyone

[Skeans1]

Had a smart carb in the past let's just say I wouldn't get one, personal preference I prefer Mikuni.

[jcs003]

hmm ok, were do i look for carbs? pwk or mikuni 38/39?  john ill still be looking around

call carb parts warehouse and tell them your set-up and they will have it tuned well out of the box.

John

[Anything2stroke]

Ok thank you! ill check it out

[rablack21]

Check with Eddie sanders racing. Great pricing, comes jetted pretty close, and sometimes Eddie throws in extra jets and a jetting tool. http://Www.esr250.com