TRX250r.org

Author Topic: PWK carb  (Read 179 times)

Online The norm

  • Sr. Member
  • ****
  • Posts: 257
  • Karma: +11/-0
    • View Profile
PWK carb
« on: June 29, 2017, 12:59:42 PM »
I'm looking for a 38mm or 39mm pwk or airstriker carbs used  is and in good shape.

Thanks Loren
I had a BDT motor once.....It SUCKED!
Currently: Hybrid Engineering 310 stroker built by Pete

Online Sand_Blaster

  • Sr. Member
  • ****
  • Posts: 316
  • Karma: +10/-0
    • View Profile
Re: PWK carb
« Reply #1 on: July 01, 2017, 03:53:25 PM »
It looks like I have a 39pwk. The only problem is I don't have a top or slide for it. Is there a way to tell what size it is? It seems to match up to my 39mm, but It could be a 38. I would sell super cheap..
87 Trx250r & 99 Banshee

Online jwraymond6

  • Sr. Member
  • ****
  • Posts: 471
  • Karma: +11/-0
    • View Profile
Re: PWK carb
« Reply #2 on: July 01, 2017, 04:11:29 PM »
It looks like I have a 39pwk. The only problem is I don't have a top or slide for it. Is there a way to tell what size it is? It seems to match up to my 39mm, but It could be a 38. I would sell super cheap..

The 39mm is measured on the inside of the carb bell the outside would be the same as a 38pwk
87 363 sphynx built by Pete @ hybrid engineering

Online The norm

  • Sr. Member
  • ****
  • Posts: 257
  • Karma: +11/-0
    • View Profile
Re: PWK carb
« Reply #3 on: July 01, 2017, 09:43:25 PM »
Sand_blaster (I don't know your name lol) shoot me a pm. I don't care if it's a 38 or 39. I am just trying to set up a buddy's atc. Anything is better than the stock carb
I had a BDT motor once.....It SUCKED!
Currently: Hybrid Engineering 310 stroker built by Pete

Online Sand_Blaster

  • Sr. Member
  • ****
  • Posts: 316
  • Karma: +10/-0
    • View Profile
Re: PWK carb
« Reply #4 on: July 02, 2017, 12:25:52 PM »
Pm sent
87 Trx250r & 99 Banshee