TRX250r.org

Author Topic: Cr250 gasket  (Read 114 times)

Offline muthahucker

  • Jr. Member
  • **
  • Posts: 74
  • Karma: +10/-0
    • View Profile
Cr250 gasket
« on: August 07, 2017, 12:42:14 PM »
What year of CR250 head gasket fits the TRX so I can use a thin gasket on my build?
Or does anyone happen to have the honda part number?
Thanks

Offline broken1

  • Hero Member
  • *****
  • Posts: 703
  • Karma: +10/-0
    • View Profile
Re: Cr250 gasket
« Reply #1 on: August 07, 2017, 08:41:35 PM »
« Last Edit: August 07, 2017, 08:43:59 PM by broken1 »
overkill is an often underrated achievement

Offline muthahucker

  • Jr. Member
  • **
  • Posts: 74
  • Karma: +10/-0
    • View Profile
Re: Cr250 gasket
« Reply #2 on: August 09, 2017, 08:41:40 PM »
Thanks.  Looks like they are talking more about the CR250 head, less about the actual gasket...but it sounds like the 86-89 gasket should work.
Thanks

Online hickwheeler

  • Hero Member
  • *****
  • Posts: 624
  • Karma: +11/-0
    • View Profile
Re: Cr250 gasket
« Reply #3 on: August 10, 2017, 12:05:38 AM »
Isn't the ATC gasket thinner also.

Offline broken1

  • Hero Member
  • *****
  • Posts: 703
  • Karma: +10/-0
    • View Profile
Re: Cr250 gasket
« Reply #4 on: August 11, 2017, 02:06:35 AM »
Isn't the ATC gasket thinner also.

The ATC head gasket is thinner than the TRX gasket but not by much. 
overkill is an often underrated achievement

Offline Langbolt

  • Sr. Member
  • ****
  • Posts: 308
  • Karma: +10/-0
    • View Profile
Re: Cr250 gasket
« Reply #5 on: August 14, 2017, 09:17:25 AM »
If you're looking for the 0.020" thick head gasket....you'll need the 1989-1991 Cr250r head gasket.

http://www.partzilla.com/parts/detail/honda/HP-12254-KZ3-000.html

 ;)