TRX250r.org

Author Topic: GEARING AND CHAIN HELP PLEASE  (Read 2288 times)

Offline DOUGLAS

GEARING AND CHAIN HELP PLEASE
« on: December 10, 2017, 06:30:53 AM »
what should I be running for gearing and chain ? here is my set up 
engine led 363 big bore pipe
38 carb
fuel C 12
tires 20-10-9
woods riding
stock length swing arm
ride woods
i'm mostly in 2 nd through 5 th
we have a few area's we will touch 6 th
LED 363 87 stock frame

Offline croat1

Re: GEARING AND CHAIN HELP PLEASE
« Reply #1 on: December 10, 2017, 06:31:06 PM »
steel sprockets and a DID or RK chain.  the X ring chains.  I don't have a big bore so I can't help with gearing.  @Tbone07 what do you run?

Joe


Offline Sand_Blaster

Re: GEARING AND CHAIN HELP PLEASE
« Reply #2 on: December 11, 2017, 11:57:13 AM »
Your running 20" tires so your probably fine on stock gearing.
DID all the way. I ran a cheapy chain on the banshee a non o-ring and it rusted up within one ride and it was popping and making all kinds of loud noises. I switched to a DID and have zero complaints.
87 Trx250r & 99 Banshee

Offline Tbone07

Re: GEARING AND CHAIN HELP PLEASE
« Reply #3 on: December 21, 2017, 11:33:40 AM »
I run 13/38 or 14/38 in the woods with my LED 350. I can confirm that when I get home from work
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline DOUGLAS

Re: GEARING AND CHAIN HELP PLEASE
« Reply #4 on: December 21, 2017, 06:55:02 PM »
thank you Tbone7
LED 363 87 stock frame

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38