TRX250r.org

Author Topic: WANTED: bottom engine mount BOLT & NUT  (Read 266 times)

Online 2Nubs

WANTED: bottom engine mount BOLT & NUT
« on: August 07, 2018, 10:18:48 AM »
I need the long bolt and nut that goes through the bottom frame mounted tabs and the engine case.


Number 18 in the diagram. Thanks

Online 2Nubs

Re: WANTED: bottom engine mount BOLT & NUT
« Reply #1 on: August 07, 2018, 11:07:27 AM »
P/N: 90152-964-000

Online jcs003

Re: WANTED: bottom engine mount BOLT & NUT
« Reply #2 on: August 07, 2018, 12:04:29 PM »
Try and match on McMaster-Carr

Online 2Nubs

Re: WANTED: bottom engine mount BOLT & NUT
« Reply #3 on: August 07, 2018, 12:08:06 PM »
I work at a warehouse full of aviation hardware so I should be able to find something to work. Just figured someone might have one laying around or a superior part number for oem.

Online croat1

Re: WANTED: bottom engine mount BOLT & NUT
« Reply #4 on: August 07, 2018, 07:30:13 PM »
use bolt P/N 96400-10140-00 (its 5mm longer than the bolt you are looking for).

Joe

Online 2Nubs

Re: WANTED: bottom engine mount BOLT & NUT
« Reply #5 on: August 08, 2018, 09:30:07 AM »
use bolt P/N 96400-10140-00 (its 5mm longer than the bolt you are looking for).

Joe

I kind of figured that would work, but before I could measure to verify ATVGuy had already sent me pics of that bolt, an A arm bolt, and a brake caliper to brake stay bolt. If he can't find it you're in trouble! haha

Online The norm

Re: WANTED: bottom engine mount BOLT & NUT
« Reply #6 on: August 08, 2018, 10:43:35 PM »
Service honda has the longer bolt
I had a BDT motor once.....It SUCKED!
Currently: Hybrid Engineering 310 stroker built by Pete

Offline dp250r

Re: WANTED: bottom engine mount BOLT & NUT
« Reply #7 on: August 09, 2018, 04:42:23 PM »
I called my local Honda car dealership told them that size bolt and they ordered them for me.10x135.The bolts are for a honda car but look exactly like the oem honda 250r bolt.
« Last Edit: August 09, 2018, 04:45:21 PM by dp250r »

Online 2Nubs

Re: WANTED: bottom engine mount BOLT & NUT
« Reply #8 on: August 09, 2018, 05:12:39 PM »
I called my local Honda car dealership told them that size bolt and they ordered them for me.10x135.The bolts are for a honda car but look exactly like the oem honda 250r bolt.

That's awesome! Good to know for future searches.