Recent Posts

Pages: [1] 2 3 ... 10
MX / Re: Whoís still racing?
« Last post by rablack21 on Today at 02:16:04 PM »
Any recommendations on a cheap sports camera? I hear there are some decent ones out there for a good price.

My experiences with the cheaper action cameras has been pretty bad. I tried to skimp on them at first but still ended up buying a GoPro. I would have been better off buying a GoPro to start
This has been my experience as well. The picture was crappy on mine.
Projects / Re: Rebuild LSR/HOUSER
« Last post by Snowmaker11 on Today at 12:21:18 AM »
On another note....what does that white LSR look like nowadays?

Engine and Bottom End / cylinder sleeves
« Last post by croat1 on April 19, 2018, 06:27:31 PM »
Advanced Sleeve is another place (besides LA Sleeve) that makes oem cylinder sleeves.  thanks to @hickwheeler for mentioning this to me.  The company is local to my area.  If you look at the site....they offer a thick aluminum sleeve;_ylu=X3oDMTByOHZyb21tBGNvbG8DYmYxBHBvcwMxBHZ0aWQDBHNlYwNzcg--/RV=2/RE=1524205318/RO=10/

Projects / Re: New member new project
« Last post by Hawgpilot on April 18, 2018, 05:41:41 PM »
Getting close to being finished
Projects / Re: starting my build
« Last post by jcs003 on April 18, 2018, 02:06:21 PM »
Glad you're finding the fun in the alignment issue @DOUGLAS
It just needs to be aligned fairly well or you get chain derailment and damaged cases.  nobody want that.
Other ATV's / Re: Roll design - gasgas 250 hybrid
« Last post by jcs003 on April 18, 2018, 06:30:23 AM »
here is the yz caliper modified and with fresh PC.
Projects / Re: OJís Buy Once Cry Once Build Thread
« Last post by havinnoj on April 18, 2018, 01:57:35 AM »
Throwing some ti hardware on this build
Suspension and Chassis / Re: Chain Sliders, Rollers, Rub Blocks
« Last post by broken1 on April 17, 2018, 02:03:27 PM »
Thanks guys. Can you still get the OEM lower rub block (piece that goes behind the sprocket, under the swingarm)?

Unfortunately those OEM rub blocks are another part Honda added to their discontinued list... I think the one's I got are Moose & they were only $13 at DTR.
Projects / Re: No-link build project
« Last post by Michael88R on April 16, 2018, 11:24:26 PM »
I havenít been on here in awhile. Yes. Roll Design took deposits and made a run of lobo swingarms. I went with the Roll Design. Iím going to sell the Koq. Just been lazy.  I need to strip the PC so the buyer can go with their choice of color.
Engine and Bottom End / Re: New pro grade 89 year style water pump shafts
« Last post by havinnoj on April 16, 2018, 09:23:29 PM »
Quote from: rablack21
No problem at all. Ball park time frame would be 2 weeks for the first batch of 20. Test pieces are being machined this week. Then heat treated. After confirming the hardness and overall finish, I will make the other 18. Impellers will be a little longer. They will be made of billet aluminum. Grade not decided yet.
Cool. Keep us updated!
Pages: [1] 2 3 ... 10