TRX250r.org

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Pumashine

Pages: [1] 2 3 ... 163
1
Engine and Bottom End / Re: Neil Clutch mod update or changes?
« on: January 08, 2023, 04:24:10 PM »
I thought you all might come up with a thickness everyone could use and I would make a bunch of washers for out community. But it never seemed to happen. Good luck, We only were able to come up with different thicknesses of washers to help with the difference of clutch push rods. I still have those sets.

2
Carburetor, Intake, and Exhaust / Re: SmartCarb SC2 38mm
« on: July 15, 2022, 04:48:34 PM »
I am glad the smart carb worked for you. We were running 400+ cc motors. Jetting to lean and burned a few bores. X tra crispy throttle response. But seemed to die for no reason. Have not been able to play with them since I lost use of my right arm. Thanks for the update, Pumashine

3
Engine and Bottom End / Re: Clutch arm play adjustment
« on: May 29, 2022, 12:52:06 AM »
I did a thread on this a few years ago. I was offering different thickness of stainless steel washers to fine tune after clutch update. Looks like you are where you need to be.

4
For Sale - Parts / Re: Baldwin front hubs
« on: February 14, 2022, 08:30:40 PM »
Joe is a moderator here and he also keeps the peeps on facebook informed.

5
Introductions / Re: AZ_TRx250r mid-life crisis...
« on: January 04, 2022, 03:20:02 PM »
Well.........let's see some pics!

Break her out and give her some love. Gusset kits are in stock and ship the next day. I only have 3 Honda stands left and  the Honda winged ones are in production.

6
Wanted / Re: Pumashine Shock Tower Reinforcement Wanted
« on: October 24, 2021, 05:50:41 PM »
I tried bending some 5/8" round tube the same shape. Got like 20 done but have to make a jig to cut to 7". Some peeps said they would prefer the 3/4" square tubing but I have not been able to find anyone to do it.  :'(

7
Duner / Re: 2021 Winchester 250r Takeover Meet Up Ride
« on: August 16, 2021, 09:01:37 PM »
I think everyone here had a good time. Some facebook guys were complaining about the organization of the schedule. The peeps on facebook suck. I did not get to see Robert Negrete. Alot of those guys were kinda loners.

8
The Mad Scientist / Re: Left side seal driver
« on: May 19, 2021, 01:55:06 AM »
Thats what I was gonna say. More like 1/4" or 6mm in depth.

9
The Mad Scientist / Re: Radiator shrouds
« on: May 18, 2021, 11:02:06 PM »
The ones with polished insides are mine.  Phil did these custom for me - I can say his attention to detail and customer service has been great.  The initial set HE was not pleased with, so he purchased a full new polishing setup to bring the shine to a place he was happy with.

The polish looks good. Saw these earlier on Facebook. It was noted the thickness was reassuring. Great to have someone making cool stuff. Thumbs up to Mr. Phil Rohde.  My polisher showed up last week after 2 years. I will be having the shiny motor mounts available again.

10
Administration/Moderator Questions / Re: Please remove my threads
« on: May 04, 2021, 12:07:57 PM »
Just because people don't agree with you does not mean they are against you. Lots of people disagree with some of my thinking. Well like you it makes me try harder to prove them wrong. But I dont hold it against someone to have a different opinion then me.
Some guys swear up and down with compression checks ans leak down checks. You spend your time what you like to do I am just going to go ride.  We all ride the 250r, thats good enough for me.

11
Administration/Moderator Questions / Re: Please remove my threads
« on: April 29, 2021, 12:45:58 AM »
I wondered what happen to F Red. I miss his input along with Desert R from time to time. Try to be patient you guys. We need all the experienced R Guru's to wake us up from time to time. Just because  we don't leave positive or negative feedback does not mean we do not appreciate your input on .org.  :)

12
Hybrid 250R / Re: DRD&D 500R
« on: March 21, 2021, 08:24:38 PM »
Freaking awesome thread

13
Pumashine 250R Products / Re: 450r Foot peg adapters for the 250r
« on: March 16, 2021, 10:17:14 PM »
I made up all the parts and my stoner machinist tapped the wrong pitch on the thread. He then tapped them the fine thread. I am gonna remake these. Really sucks cause I made 50 stets for the 3 wheeler.
http://www.tlr-online.com/yahoo_site_admin/assets/images/Foot_Peg_Adapters.33363630_std.jpg

14
Wanted / Re: Kick starter spindle collar
« on: September 24, 2020, 09:17:47 PM »
1.065" OD or 27mm  .803 ID  and 1.178" long, about 30mm long. I think Carlos makes them.

15
Wanted / Re: Lower fender cover
« on: September 17, 2020, 06:52:09 PM »
The 86 and 87 use a similar nose cone.  I think that one you pictured is the 88 style? I have not opened the box with the 88 fenders in it to see if I have an extra one.

Pages: [1] 2 3 ... 163