TRX250r.org

Author Topic: TRX 250R 350L Prototype Exhaust  (Read 4234 times)

Offline ledperformance

TRX 250R 350L Prototype Exhaust
« on: August 23, 2013, 04:53:02 PM »
Arlan works on the 350L prototype exhaust for TRX 250R.
Welding the pipe.
[ATTACH=CONFIG]1536[/ATTACH]
Cutting out the pieces.
[ATTACH=CONFIG]1527[/ATTACH]
Partially completed pipe.
[ATTACH=CONFIG]1528[/ATTACH]
Finished product.
[ATTACH=CONFIG]1529[/ATTACH]
Rolling the sections.
[ATTACH=CONFIG]1530[/ATTACH]
Finished product.
[ATTACH=CONFIG]1531[/ATTACH]
Fitting the sections.
[ATTACH=CONFIG]1532[/ATTACH]
Grinding the sections for a good fit.
[ATTACH=CONFIG]1534[/ATTACH]
Fitting sections.
[ATTACH=CONFIG]1535[/ATTACH]

Offline trx250scar

TRX 250R 350L Prototype Exhaust
« Reply #1 on: April 27, 2014, 01:59:28 PM »
Is it me or Does the pics not match the description.

Offline Bigred

TRX 250R 350L Prototype Exhaust
« Reply #2 on: April 27, 2014, 03:54:23 PM »
Lol a ya
1986 R
260cc oem cylinder
tc ported
38mm as carb
boyseen reeds
Ohlins front shocks
redone oem rear shock
93 pump fuel
cool head inline temp gauge

Offline havinnoj

TRX 250R 350L Prototype Exhaust
« Reply #3 on: April 27, 2014, 06:27:33 PM »
Quote from: spiritaces;32528
It is, I think OJ added pics to anywhere they were missing. It was so we didnt have any broken links. [MENTION=276]ledperformance[/MENTION] can you put the pictures back?

Nothing special happened to the pics / links - just a byproduct of moving where the pics were stored.  Luckily it only pertains to the first few months of the forum's attachments.

Offline JesseA420

TRX 250R 350L Prototype Exhaust
« Reply #4 on: May 06, 2014, 05:28:55 PM »
did anything come of this 350L??
Quote from: Hawaiiysr;66760
Yup i sucked the head. taste like dirt.

[/FONT]

Offline ledperformance

TRX 250R 350L Prototype Exhaust
« Reply #5 on: May 17, 2014, 10:12:02 PM »
I don't know what to do about the pictures.
The 350L was part of the development process. Today I have been working on LED 350RX4. It is a 27 piece big bore pipe for the 330-370, LED ESR and LED Sphinx cylinders. We a hoping to increase the peak hp and at the same time keep the great low end and mid range power of the 350G pipe. We have increased the amount of sections to make the bends smoother. Unfortunately this will increase the cost of the pipe. If it passes our test criteria it will be sold as a limited quantity Works Team pipe.  Notice I spelt works correctly!

Offline christph

TRX 250R 350L Prototype Exhaust
« Reply #6 on: May 19, 2014, 12:39:39 AM »
Quote from: ledperformance;34260
I don't know what to do about the pictures.
The 350L was part of the development process. Today I have been working on LED 350RX4. It is a 27 piece big bore pipe for the 330-370, LED ESR and LED Sphinx cylinders. We a hoping to increase the peak hp and at the same time keep the great low end and mid range power of the 350G pipe. We have increased the amount of sections to make the bends smoother. Unfortunately this will increase the cost of the pipe. If it passes our test criteria it will be sold as a limited quantity Works Team pipe.  Notice I spelt works correctly!

Any estimate on how much more?  Also, when will they be available?  I'll be looking for a new pipe this summer.
1982 ATC 250R
1984 ATC 250R
1986 ATC 250R
1988 TRX 250R
1989 TRX 250R

Offline pinned250r

TRX 250R 350L Prototype Exhaust
« Reply #7 on: May 19, 2014, 09:26:24 AM »
Quote from: ledperformance;34260
it will be sold as a limited quantity Works Team pipe.  Notice I spelt works correctly!

I almost got really upset....Then i realized correct grammar and got happy again.
I ride PINNED! Therefore, no bdt in this household.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38