TRX250r.org

Author Topic: Dress Up Products  (Read 8971 times)

Online Pumashine

Dress Up Products
« on: July 05, 2013, 10:10:18 AM »
All items can be purchased here: Dress Up
« Last Edit: July 05, 2013, 10:31:47 AM by Pumashine »
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Online Pumashine

Dress Up Products
« Reply #1 on: July 05, 2013, 10:10:47 AM »
85/87 TRX250R/ATC250R Engine Dress Up Kit


This kit includes:

Polished OEM Ignition Cover
Polished OEM Clutch Cover
New Reusable Cometic Gaskets (Ignition/Clutch Cover's)
Polished Stainless Hex Mounting Bolts (6 for Ignition/16 for Clutch)
Polished OEM Waterpump Cover
New OEM Mechanical Seal, Waterpump Bearing, Seals, Separator Plate, Gaskets and Copper Washers.
New OEM Oil Fill Cap with New Oring

You will never have to buy gaskets again when refinishing the shine. Extra time was taken on each set to remove all polishing compound (inside/outside) for a great finish and ready for instant installation.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Online Pumashine

Dress Up Products
« Reply #2 on: July 05, 2013, 10:13:24 AM »
TRX250R Engine Mount Kits
Kits include: 2 OEM Style Engine Mounts
Made out of 304 Stainless Steel, Mirror Finish on Both Sides, .120" Thick
Fully Polished Bolt/Lock Nut Available for $10 Extra
Please Note - Design on Mount is just to show Reflection

Plain


Window


"X" Window
« Last Edit: July 05, 2013, 08:51:16 PM by Pumashine »
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Online Pumashine

Dress Up Products
« Reply #3 on: July 05, 2013, 10:14:20 AM »
TRX250R Custom Coil Mounts
Used to mount a coil for a CR250 Upgraded Ignition System
Coil Not Included
Please Note - Design on Mount is just to show Reflection

Natural Finish


Polished Finish
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Online Pumashine

Dress Up Products
« Reply #4 on: July 05, 2013, 10:14:54 AM »
1986 TRX250R Polished Radiator Shroud Mounts
Made out of 304 Stainless Steel, .048 Thick (Same as Stock)
Mirror Finish on Both Sides

Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Online Pumashine

Dress Up Products
« Reply #5 on: July 05, 2013, 10:15:30 AM »
TRX250R Stock Replacement Chain Slider Stay
Made out of 304 Stainless Steel, .036 Thick
Polished on Front Side
Also works with UPP Chain Sliders

Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Rupp250

Dress Up Products
« Reply #6 on: July 05, 2013, 10:17:55 AM »
Can you make it an option for ALL the parts to come in a raw un-polished finish. Some don't like things all shiney.  And when am I going to see a front sprocket guard on there.

Oh and thanks for the parts at a great price.
DRAG- Puma in a Ziggy Chassis
TRAIL -86  250R ported stock cylinder
DUNER -86 250R  Flinstone

Online Pumashine

Dress Up Products
« Reply #7 on: July 05, 2013, 11:41:17 AM »
Quote from: Rupp250;692
Can you make it an option for ALL the parts to come in a raw un-polished finish.
The price of polished stainless verses regular is roughly the same. So in the beginning all parts were made of shiny material. It can be painted easily. But if you want the natural finish I would be happy to make them that way. Thanks Russel!
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Farmboy1979

Dress Up Products
« Reply #8 on: July 05, 2013, 12:02:14 PM »
Think you can make frame guards to protect the sides of the frame where your boots rub the paint off?  I'll even chip in for some of your R&D time if it would help.

Online Pumashine

Dress Up Products
« Reply #9 on: July 05, 2013, 01:09:29 PM »
I saw this once before. Do you have any links to show what you are referring to?
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Farmboy1979

Dress Up Products
« Reply #10 on: July 05, 2013, 01:32:30 PM »
[ATTACH=CONFIG]147[/ATTACH]

Something like this.

Offline Farmboy1979

Dress Up Products
« Reply #11 on: July 05, 2013, 01:33:36 PM »
Sorry... Thought you never saw my post and really am wanting these....,

Online Pumashine

Dress Up Products
« Reply #12 on: July 05, 2013, 01:48:44 PM »
What type of material do you think they should from?
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Farmboy1979

Dress Up Products
« Reply #13 on: July 05, 2013, 02:10:17 PM »
Well, I would prefer 316 stainless with a nice polish or better yet carbon fiber.  I'm not picky though.  What is easiest for you to work with?

Online Pumashine

Dress Up Products
« Reply #14 on: July 05, 2013, 02:58:37 PM »
Carbon fiber is nice. I cannot do anything in that area. You would have to contact the place that makes the one in the picture. Polished stainless would I would have to work with.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/