TRX250r.org

Author Topic: Engine Stands  (Read 17190 times)

Offline Pumashine

Engine Stands
« Reply #15 on: August 21, 2013, 01:46:22 PM »
I don't remember why this is not on the site. Must have not been double polished at the time.


Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Pumashine

Engine Stands
« Reply #16 on: February 14, 2014, 03:53:28 PM »
Here's what I have been working on end of January beginning of February. The ones closest are the .ORG stands. There will be a drawing for 2 lucky members as soon as these are finished. I spent 12 hours programming the new ATC version. The old version is in the back. Lost the programs last year. This set is free if someone wants to pay $15 for shipping and mounting bolts. One side is bent, as it had a motor on it that was dropped. Considering sending a couple sets to our member Powderillusions for some sweet PC. Anyone interested in a certain PC can ask now.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline jcs003

Engine Stands
« Reply #17 on: February 14, 2014, 04:31:44 PM »
i will buy the bent one since im cheap.  money sent with a couple extra dollars/  thanks

john

Offline 86-250rbuild

Engine Stands
« Reply #18 on: February 15, 2014, 02:32:47 AM »
Very nice . Do you still have the old sets available .

Online havinnoj

Engine Stands
« Reply #19 on: February 15, 2014, 10:40:19 AM »
Sweet stands here!!

Offline Pumashine

Engine Stands
« Reply #20 on: February 15, 2014, 01:37:40 PM »
Quote from: 86-250rbuild;25609
Very nice . Do you still have the old sets available .
These are 4 styles of the steel stands. The aluminum and stainless are run separately.

After deburring the stands with a standard belt sander they are run through a deburring machine which this one is called a Timesaver. Its a 2 foot wide sander with the belt on top. Parts are fed in 2 at a time

Coming out the other side.

This deburrs the letters on the inside of the part. Cleans any dirt/oil off the parts and gives a brushed finish.

Next the parts are formed before painting.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Powderillusions

Engine Stands
« Reply #21 on: February 15, 2014, 06:36:46 PM »
Oh thats awesome -- automatic De-burring, BIG time time saver!!

Offline Pumashine

Engine Stands
« Reply #22 on: February 17, 2014, 12:24:14 PM »
Quote from: spiritaces;25656
Frickin sweet!!! .org engine stands!!!
Little error in letter placement on the .org stands. The cut outs go too far into the bend area. You can see in the pic.



So I moved the letters over and ran a couple more. I made a set for PDX Bigfoot Jason you can see in the rear.

Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline rablack21

Engine Stands
« Reply #23 on: February 17, 2014, 12:56:44 PM »
Me likey....da shiny!

Offline Pumashine

Engine Stands
« Reply #24 on: February 17, 2014, 02:46:27 PM »
Quote from: rablack21;25840
Me likey....da shiny!
The shine will disappear with a few coats of paint. Were ready to paint.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Morse250r

Engine Stands
« Reply #25 on: February 17, 2014, 08:13:20 PM »
Looks good tony!
Packard built puma "bad investment"
88 rb racing duner
Trx 70\'s
Atc 125

Offline Piney0

Engine Stands
« Reply #26 on: February 24, 2014, 02:05:05 PM »
I put my engine in the engine stand yesterday, and wanted to say the engine fits better in the stand than it does in the frame!  Just dropped engine on the stand and all bolt holes were aligned without any fuss!  I couldn't be any happier.

Offline 86-250rbuild

Engine Stands
« Reply #27 on: March 02, 2014, 05:33:44 AM »
Cant wait Too get mine.

Offline rsss396

Engine Stands
« Reply #28 on: March 02, 2014, 10:10:37 AM »
anybody that does not have one because they dont think they would use it, is missing out!
 They are very handy have around even if you only use it during rebuilding your chassis or assembling the topend of the motor.

Thanks Tony these are awesome!
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline Pumashine

Engine Stands
« Reply #29 on: March 21, 2014, 09:15:51 PM »
Quote from: spiritaces;29534
You ever get the .org stands done yet?
Yep, got all the .org stands painted and ready to give away. Who wants one?
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/