Author Topic: Engine Stands (Read 25162 times)

Pumashine · « **Reply #15 on:** August 21, 2013, 01:46:22 PM »

I don't remember why this is not on the site. Must have not been double polished at the time.

Pumashine · « **Reply #16 on:** February 14, 2014, 03:53:28 PM »

Here's what I have been working on end of January beginning of February. The ones closest are the .ORG stands. There will be a drawing for 2 lucky members as soon as these are finished. I spent 12 hours programming the new ATC version. The old version is in the back. Lost the programs last year. This set is free if someone wants to pay $15 for shipping and mounting bolts. One side is bent, as it had a motor on it that was dropped. Considering sending a couple sets to our member Powderillusions for some sweet PC. Anyone interested in a certain PC can ask now.

jcs003 · « **Reply #17 on:** February 14, 2014, 04:31:44 PM »

i will buy the bent one since im cheap. money sent with a couple extra dollars/ thanks

john

86-250rbuild · « **Reply #18 on:** February 15, 2014, 02:32:47 AM »

Very nice . Do you still have the old sets available .

havinnoj · « **Reply #19 on:** February 15, 2014, 10:40:19 AM »

Sweet stands here!!

Pumashine · « **Reply #20 on:** February 15, 2014, 01:37:40 PM »

Quote from: 86-250rbuild;25609

Very nice . Do you still have the old sets available .

These are 4 styles of the steel stands. The aluminum and stainless are run separately.

After deburring the stands with a standard belt sander they are run through a deburring machine which this one is called a Timesaver. Its a 2 foot wide sander with the belt on top. Parts are fed in 2 at a time

Coming out the other side.

This deburrs the letters on the inside of the part. Cleans any dirt/oil off the parts and gives a brushed finish.

Next the parts are formed before painting.

Powderillusions · « **Reply #21 on:** February 15, 2014, 06:36:46 PM »

Oh thats awesome -- automatic De-burring, BIG time time saver!!

Pumashine · « **Reply #22 on:** February 17, 2014, 12:24:14 PM »

Quote from: spiritaces;25656

Frickin sweet!!! .org engine stands!!!

Little error in letter placement on the .org stands. The cut outs go too far into the bend area. You can see in the pic.

So I moved the letters over and ran a couple more. I made a set for PDX Bigfoot Jason you can see in the rear.

rablack21 · « **Reply #23 on:** February 17, 2014, 12:56:44 PM »

Me likey....da shiny!

Pumashine · « **Reply #24 on:** February 17, 2014, 02:46:27 PM »

Quote from: rablack21;25840

Me likey....da shiny!

The shine will disappear with a few coats of paint. Were ready to paint.

Morse250r · « **Reply #25 on:** February 17, 2014, 08:13:20 PM »

Looks good tony!

Piney0 · « **Reply #26 on:** February 24, 2014, 02:05:05 PM »

I put my engine in the engine stand yesterday, and wanted to say the engine fits better in the stand than it does in the frame! Just dropped engine on the stand and all bolt holes were aligned without any fuss! I couldn't be any happier.

86-250rbuild · « **Reply #27 on:** March 02, 2014, 05:33:44 AM »

Cant wait Too get mine.

rsss396 · « **Reply #28 on:** March 02, 2014, 10:10:37 AM »

anybody that does not have one because they dont think they would use it, is missing out!
They are very handy have around even if you only use it during rebuilding your chassis or assembling the topend of the motor.

Thanks Tony these are awesome!

Pumashine · « **Reply #29 on:** March 21, 2014, 09:15:51 PM »

Quote from: spiritaces;29534

You ever get the .org stands done yet?

Yep, got all the .org stands painted and ready to give away. Who wants one?