TRX250r.org

Author Topic: getting the quads all set up at my new house  (Read 3325 times)

Offline Morse250r

getting the quads all set up at my new house
« on: September 30, 2013, 06:55:27 AM »
[ATTACH=CONFIG]1971[/ATTACH]
Packard built puma "bad investment"
88 rb racing duner
Trx 70\'s
Atc 125

Offline rsss396

getting the quads all set up at my new house
« Reply #1 on: September 30, 2013, 08:25:55 AM »
nice Johann! it takes a while to get everything setup in a new house
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline Pumashine

getting the quads all set up at my new house
« Reply #2 on: September 30, 2013, 09:43:54 AM »
I really like the air coming off the ceiling. Pretty brilliant there. Hope you don't mind if I copy that idea.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline Morse250r

getting the quads all set up at my new house
« Reply #3 on: September 30, 2013, 10:15:50 AM »
Not at all tony.  It was left there when I moved in. It is nice to be able to go anywhere with it !
Packard built puma "bad investment"
88 rb racing duner
Trx 70\'s
Atc 125

Offline Pumashine

getting the quads all set up at my new house
« Reply #4 on: September 30, 2013, 11:23:09 AM »
Quote from: Morse250r;13507
Not at all tony.  It was left there when I moved in. It is nice to be able to go anywhere with it !
 Yes, it dawns on me every time I go to put air in the tires before heading to the dunes. Always got to get the hose unwound and out where from where ever it ended up last. The last compressor I bought came with a reel but did not know where to put it.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline sameltoe

getting the quads all set up at my new house
« Reply #5 on: September 30, 2013, 11:29:27 AM »
Pretty kewl Little set up!
Arens, Arsfx, BHP363
Arens, lsr dc2 no link, lsr dc4, BHP363

Offline jamieg45

getting the quads all set up at my new house
« Reply #6 on: September 30, 2013, 11:49:30 AM »
Nice set up man, I want a garage to work in so bad.
01 Lsr 250r
00 Walsh 250r

Offline Dezsled

getting the quads all set up at my new house
« Reply #7 on: September 30, 2013, 12:17:35 PM »
Wow... U really could eat off that floor!

Sweeeeet


\'04 Roll LOBO II TRX250R
\'06 LTR450
\'87 HPR LT500
\'87 LT500
\'85 & \'86 LT250
\'86 & \'87 TRX250R
\'07 & \'09 Husqvarna TE450
\'00 CR125R
Parts & more parts

Offline GO OVRIT

getting the quads all set up at my new house
« Reply #8 on: September 30, 2013, 01:13:29 PM »
I like the loft.  Do you have ramps or just super big muscles?

Offline Morse250r

getting the quads all set up at my new house
« Reply #9 on: September 30, 2013, 05:06:19 PM »
Haha ramps
Packard built puma "bad investment"
88 rb racing duner
Trx 70\'s
Atc 125

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38