TRX250r.org

Author Topic: all done!!!! just got to break her in :)  (Read 9522 times)

Offline PROX370R

all done!!!! just got to break her in :)
« Reply #15 on: June 06, 2014, 11:17:25 PM »
thanks AJ ill be ready for ya at the beach!! haha :ride:

Offline PROX370R

all done!!!! just got to break her in :)
« Reply #16 on: June 08, 2014, 07:13:46 PM »
thanks spiritaces..  :-)

Offline PROX370R

all done!!!! just got to break her in :)
« Reply #17 on: June 08, 2014, 07:38:58 PM »
okay so I took her out for a few hours to put some break in time on it.. snapped a few pictures of the spark plug :)  first pic I was in 4th gear about half throttle pulled the clutch and shut it off and rolled to a stop...  and the second pic 4th gear full throttle pass and pulled the clutch... jetting is at 195main 58pilot and DGH in the middle clip and 2 turns out!! what do you guys think?? it will idle till it runs out of fuel :wave:

Offline PROX370R

all done!!!! just got to break her in :)
« Reply #18 on: June 08, 2014, 07:42:05 PM »
sitting pretty all by herself!!! hahaha

Offline bnau267

all done!!!! just got to break her in :)
« Reply #19 on: June 08, 2014, 07:52:10 PM »
Nice work.

Offline PROX370R

all done!!!! just got to break her in :)
« Reply #20 on: June 08, 2014, 08:51:24 PM »
thank you sir [MENTION=94]bnau267[/MENTION]

Offline PROX370R

all done!!!! just got to break her in :)
« Reply #21 on: June 15, 2014, 03:56:15 PM »
new front drag cuts and smoothies!!! now all I need to get are the rear drag cuts from john safarian and ill be set!! :)

Offline Pumashine

all done!!!! just got to break her in :)
« Reply #22 on: June 15, 2014, 05:12:41 PM »
Quote from: PROX370R;36051
sitting pretty all by herself!!! hahaha


How is the tall tank working out?
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline PROX370R

all done!!!! just got to break her in :)
« Reply #23 on: June 15, 2014, 05:16:40 PM »
I can definitely go on longer rides with out having someone in a truck to take some fuel for me!! haha more so when I go to glamis and dumont!! Pismo im not worried about it..

all done!!!! just got to break her in :)
« Reply #24 on: June 15, 2014, 05:30:53 PM »
Quote from: PROX370R;36049
okay so I took her out for a few hours to put some break in time on it.. snapped a few pictures of the spark plug :)  first pic I was in 4th gear about half throttle pulled the clutch and shut it off and rolled to a stop...  and the second pic 4th gear full throttle pass and pulled the clutch... jetting is at 195main 58pilot and DGH in the middle clip and 2 turns out!! what do you guys think?? it will idle till it runs out of fuel :wave:

I'd stick with right there if you want to play it safe, cardboard brown is a good safe color to not have to worry about jet changes every time the weather changes.  You could go a size or so leaner to get a bit more out of her but I personally wouldn't.

Offline PROX370R

all done!!!! just got to break her in :)
« Reply #25 on: June 15, 2014, 05:33:38 PM »
Yeah I don't plan on going leaner... thanks for your input avenger^^

Offline rsss396

all done!!!! just got to break her in :)
« Reply #26 on: June 15, 2014, 08:19:23 PM »
Bike looks great and the plugs look good to go!
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline PROX370R

all done!!!! just got to break her in :)
« Reply #27 on: June 17, 2014, 10:36:31 PM »
Quote from: rsss396;36751
Bike looks great and the plugs look good to go!

thanks bud!

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38