TRX250r.org

Author Topic: new graphics are on!!!!!! now need a seat cover to match the look  (Read 7788 times)

Offline Bigred

Heres how she sat before sorry on bad pics its dark in my one light garage lol




and after




before




after


1986 R
260cc oem cylinder
tc ported
38mm as carb
boyseen reeds
Ohlins front shocks
redone oem rear shock
93 pump fuel
cool head inline temp gauge

Offline jamieg45

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #1 on: November 01, 2013, 02:34:35 AM »
Looks nice man, I take it you rode it after you put them on aj.
01 Lsr 250r
00 Walsh 250r

Offline scawn

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #2 on: November 01, 2013, 05:12:01 AM »
I would have trimmed the red out of the front section so that it looked like this.

[ATTACH=CONFIG]2191[/ATTACH]

Offline Burns363R

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #3 on: November 01, 2013, 08:06:03 AM »
Call up JetTrim and tell them i sent you.  They do all kinds of custom seats.  They did all 3 of mine, and i will be doing a few more this year.  Quality stuff, and the prices are better than any other seat covers i have found.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline Tbone07

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #4 on: November 01, 2013, 08:15:33 AM »
Burns do they do foam too? I need a little thicker foam
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline Burns363R

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #5 on: November 01, 2013, 09:18:55 AM »
Im not sure, but i bet they do.  They cut foam for my hump seats.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline sameltoe

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #6 on: November 01, 2013, 09:22:19 AM »
Idk about foam for a 250r. ..but they can get a soft foam for a 450r out of cali they said when I got my cover from them...I love the seat on my 450r.

OP, quad looks great!
Arens, Arsfx, BHP363
Arens, lsr dc2 no link, lsr dc4, BHP363

Offline Bigred

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #7 on: November 01, 2013, 09:44:55 AM »
Scawn I have s red oem headlight hood coming im hopping it will clash good

burns got s number
1986 R
260cc oem cylinder
tc ported
38mm as carb
boyseen reeds
Ohlins front shocks
redone oem rear shock
93 pump fuel
cool head inline temp gauge

Offline Bigred

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #8 on: November 01, 2013, 09:52:42 AM »
No she wad dirty from before havent got a chance was it lol
1986 R
260cc oem cylinder
tc ported
38mm as carb
boyseen reeds
Ohlins front shocks
redone oem rear shock
93 pump fuel
cool head inline temp gauge

Offline Burns363R

TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline FerrinMotorsports

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #10 on: November 02, 2013, 01:02:08 PM »
I'm not sure if you are interested but I have the matching seat cover for your graphics.......

Offline Bigred

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #11 on: November 02, 2013, 11:42:10 PM »
Yup i am how much and got a pic
1986 R
260cc oem cylinder
tc ported
38mm as carb
boyseen reeds
Ohlins front shocks
redone oem rear shock
93 pump fuel
cool head inline temp gauge

Offline FerrinMotorsports

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #12 on: November 03, 2013, 01:30:43 PM »
taking off for work again ...won't be back till late....will get you a pic first thing Monday AM...Sorry for the delay...

Offline Bigred

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #13 on: November 03, 2013, 05:49:39 PM »
Ok np
1986 R
260cc oem cylinder
tc ported
38mm as carb
boyseen reeds
Ohlins front shocks
redone oem rear shock
93 pump fuel
cool head inline temp gauge

Offline Bigred

new graphics are on!!!!!! now need a seat cover to match the look
« Reply #14 on: November 04, 2013, 07:29:05 PM »
The suspens is killing me lol
1986 R
260cc oem cylinder
tc ported
38mm as carb
boyseen reeds
Ohlins front shocks
redone oem rear shock
93 pump fuel
cool head inline temp gauge

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38