TRX250r.org

Author Topic: Trx250r Resi clamps  (Read 29858 times)

Offline sameltoe

Trx250r Resi clamps
« Reply #45 on: November 10, 2015, 01:25:59 PM »
:rofl::rofl:
Quote from: Pumashine;60898
Am I supposed to remember what size those were? :rofl: I build hundreds of parts every day with thousands of different dimensions each job. The stock resi's are around 2.250"
Where's your cheat sheet :rofl:
Arens, Arsfx, BHP363
Arens, lsr dc2 no link, lsr dc4, BHP363

Offline trx250scar

Trx250r Resi clamps
« Reply #46 on: November 10, 2015, 04:28:31 PM »
Quote from: Pumashine;60898
Am I supposed to remember what size those were? :rofl: I build hundreds of parts every day with thousands of different dimensions each job. The stock resi's are around 2.250"

Well I didn't expect that you would remember my clamps but I did expect you would remember the OEM ressi size as the first time you made them you knew the OEM size. I figured it would be the same this time. My ressi is 2.245". Thanks

Offline slowstang89

Trx250r Resi clamps
« Reply #47 on: March 28, 2016, 02:32:45 PM »
Are you still making the resi clamps for a stock frame?

Offline Pumashine

Trx250r Resi clamps
« Reply #48 on: March 28, 2016, 02:43:01 PM »
Quote from: slowstang89;66037
Are you still making the resi clamps for a stock frame?
I will be making one last run so I can build a set for [MENTION=6]atv fan 28[/MENTION]
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline slowstang89

Trx250r Resi clamps
« Reply #49 on: March 28, 2016, 02:46:09 PM »
I will take 6 if you can do that...you just need my resi size?

Sent from my E6782 using Tapatalk

Offline Pumashine

Trx250r Resi clamps
« Reply #50 on: March 28, 2016, 05:08:25 PM »
Quote from: slowstang89;66042
I will take 6 if you can do that...you just need my resi size?
Yes sir. Use a dial caliper if available
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline Pumashine

Re: Trx250r Resi clamps
« Reply #51 on: September 03, 2017, 03:50:56 PM »
Quote from: slowstang89;66042
I will take 6 if you can do that...you just need my resi size?
Yes sir. Use a dial caliper if available

So this guy wants clamps made and never gives me the cut size. I am so tired of the important people (in their minds) and the equally stupid peeps on face book I cannot make these anymore. Now if your are a real member here just send me the resi diameters and we will get stuff done! For example

The message they sent you was:

I'm needing two clamps both for a stock frame. I'll get sizes for you sometime today. But wanted to be sure you would want to make them.

Thanks,
Gene
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline Pumashine

Re: Trx250r Resi clamps
« Reply #52 on: August 18, 2018, 10:06:21 AM »
If there are any members here would like resi clamps, let me know so we can get an order going.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline Sand_Blaster

Re: Trx250r Resi clamps
« Reply #53 on: August 04, 2019, 02:46:42 PM »
Tony you still up for making clamps? I need 2 for some works, and my buddy needs 2 as well for his works. I can get you specs in a bit if you are interested.
87 Trx250r & 99 Banshee

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38