TRX250r.org

Author Topic: Frame damage - thoughts??  (Read 4290 times)

Offline atvmxr

Frame damage - thoughts??
« on: January 03, 2014, 05:02:23 PM »



What y'all think, I know the frame can crack around the seat latch.  But never seen it this bad before.  Possibly purchasing this quad, looking for input.  Thanks
Bunch of race quads that run on premix

Offline trx250scar

Frame damage - thoughts??
« Reply #1 on: January 03, 2014, 05:40:46 PM »
looks like when it started cracking it was left to kep cracking. then when it was fixed someone just put a butt load of weld and no prep work. if you can weld and fabricate a little that would be an easy fix. seems like a way to get a bargain tho.

Offline Pumashine

Frame damage - thoughts??
« Reply #2 on: January 03, 2014, 07:01:37 PM »
Looks fine except the crack. I thought it looked like it cracked after the weld job. A frame I have looks worse than that weld job. Does not seem to be a big deal. Agree you can use it as a bargaining chip.

Rubber seat mounts look to be from a 3 wheeler.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline trx250scar

Frame damage - thoughts??
« Reply #3 on: January 03, 2014, 09:13:35 PM »
Yes after a closer look of pic #2 u can see it cracked after the reweld. good eye Tony.

Offline Pumashine

Frame damage - thoughts??
« Reply #4 on: January 03, 2014, 10:30:22 PM »
Quote from: trx250scar;21318
Yes after a closer look of pic #2 u can see it cracked after the reweld. good eye Tony.
Do you think his shock was bottoming out and the weight of the rider was making the frame crack their?
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline Burns363R

Frame damage - thoughts??
« Reply #5 on: January 04, 2014, 12:09:31 AM »
If thats the only damage then id say go for it. IMHO that is not a critical area and can be easily fixed.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline jamieg45

Frame damage - thoughts??
« Reply #6 on: January 04, 2014, 09:46:39 AM »
So did you get the quad and that area is easily fixed with a aftermarket style pieces. Just like any of the aftermarket frames have and look.
01 Lsr 250r
00 Walsh 250r

Offline chrisr

Frame damage - thoughts??
« Reply #7 on: January 04, 2014, 11:59:44 AM »
Piss poor repair makes it look worse. With a good repair you should have no problems.
Let the good times roll............

Offline atvmxr

Frame damage - thoughts??
« Reply #8 on: January 07, 2014, 03:42:38 PM »
well, we came to terms and got shipping lined out.  We will see how it looks in person.  My last 4 quads have been from Minnesota, New Jersey, New York, and now Las Vegas.  All nice and close to home here in Houston, TX.  Not!! :cheerful:
Bunch of race quads that run on premix

Offline pinned250r

Frame damage - thoughts??
« Reply #9 on: January 07, 2014, 04:04:09 PM »
well if the frame is trashed, i have a nice 86 i can part with! I just really dont want to deal with shipping it though haha.
I ride PINNED! Therefore, no bdt in this household.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38