TRX250r.org

Author Topic: Latest Build complete (enter at your own risk the other 250R)  (Read 4664 times)

Offline Iceracer

Latest Build complete (enter at your own risk the other 250R)
« on: January 13, 2014, 08:21:29 AM »
So, as a general rule Ill behave and hold my stuff here to Honda as I build my 86 Atc 250r and 07 Trx450, But thought you all could appreciate this machine. The First Picture is how It started @ 2008 run of the mill 92 LT250R. The second is how it had been For the last Couple year.  The last two are its final form just before last Weekend with my all new 302 powerplant.


Offline rsss396

Latest Build complete (enter at your own risk the other 250R)
« Reply #1 on: January 13, 2014, 08:38:59 AM »
nice bike! where do you ice race? my nephew has a 250r that we ice race here in Indiana on Cedar lake  the even is called "Moto on Ice"
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline Iceracer

Latest Build complete (enter at your own risk the other 250R)
« Reply #2 on: January 13, 2014, 08:54:30 AM »
Thanks, around the Albany area of central NY. Electric City riders is the group that puts them on.

Offline rsss396

Latest Build complete (enter at your own risk the other 250R)
« Reply #3 on: January 13, 2014, 10:02:57 AM »
We had ice a week ago but then rain over this last weekend. Hopefully this weekend will ice back up since we have a couple inches of rain
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline Iceracer

Latest Build complete (enter at your own risk the other 250R)
« Reply #4 on: January 13, 2014, 11:15:11 AM »
Ya this was from the first weekend. We got rained out this past week, 1" of water on the ice. If we get some cold we should be good. Its froze up now, just need temp to make it hard.

Offline atvmxr

Latest Build complete (enter at your own risk the other 250R)
« Reply #5 on: January 13, 2014, 11:46:01 AM »
looking good Carl.  No zilla motor or Q pipe?
Bunch of race quads that run on premix

Offline rsss396

Latest Build complete (enter at your own risk the other 250R)
« Reply #6 on: January 13, 2014, 02:43:19 PM »
nephews bike

[ATTACH=CONFIG]2921[/ATTACH]
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline Iceracer

Latest Build complete (enter at your own risk the other 250R)
« Reply #7 on: January 13, 2014, 03:45:20 PM »
That's a nice looking machine,

No Ken, the Orange bike has the 500 that's getting ready for a full make over also, This one was built for the "250 class", as of last Dyno trip this pipe makes the best power spread, and it was apparent when I rode it at Ashtabula. But this is also a 4 mil 302 and that was a 265 about one click away from Kill. I have another pipe also non Q that makes more tq and hp but don't have the spread like this one. All my stuff is Strait form my shop now, only thing I don't do is stroking and balancing and sleeve's, but sleeving may get done here eventually also Ill probably have to do at least one for the next version of this cylinder.

Offline Iceracer

Latest Build complete (enter at your own risk the other 250R)
« Reply #8 on: January 13, 2014, 03:59:19 PM »
 Dialing in to trench the cases
 
Fixing a couple studs
  Finding center to bore the cases

Offline ccaiazza

Latest Build complete (enter at your own risk the other 250R)
« Reply #9 on: January 13, 2014, 11:38:08 PM »
Nice work Carl, hopefully I will be ready for Sunday. As long as my impeller shows up

Offline Iceracer

Latest Build complete (enter at your own risk the other 250R)
« Reply #10 on: January 14, 2014, 04:09:43 PM »
Dam you still waiting on that.....

Offline 1986quadracer

Latest Build complete (enter at your own risk the other 250R)
« Reply #11 on: January 20, 2014, 01:40:52 PM »
Carl you never cease to amaze me :)

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38