Author Topic: Santa Maria "Battle of the Area Codes" (Read 6164 times)

johnny22 · « **on:** March 07, 2014, 02:00:29 PM »

its goin down in Santa Maria

Rupp250 · « **Reply #1 on:** March 07, 2014, 02:46:57 PM »

They are really making ways with the track as well.
If you notice in that pic the right lane has a 4ft drop off to a mud bog hole. Supposedly they are going to widen the sand track, and put a K-rail in.

Going to be a good year around here(if I can get my junk to make a clean pass)

Rupp250 · « **Reply #2 on:** March 07, 2014, 02:50:08 PM »

Where was that posted Johnny?

johnny22 · « **Reply #3 on:** March 07, 2014, 03:06:18 PM »

Its gonna be fun man. How did your bike do at bako? Its posted on facebook

Rupp250 · « **Reply #4 on:** March 07, 2014, 03:13:28 PM »

Huh I was just on there this morning and didn't see it.

Not good in Bako. First time with this setup and just learning as I go. Kept bogging off the line then I got out of the hole FAST then missed a gear. Must have been scared I guess. Even after bogging it would trap @60-61.

Hoping to get some T&T @ Santa Maria

johnny22 · « **Reply #5 on:** March 07, 2014, 03:45:04 PM »

They just posted it a couple hours ago. Oh ok. That's all it is just learning and getting used to a light . I've only done it once and its so much different than pismo. You'll get it man. I wish I could've found out where my bike is at bako

Rupp250 · « **Reply #6 on:** March 07, 2014, 03:50:41 PM »

I've been doing it for the last couple of years now. It was just a new bike setup. A bar, 10paddles, alky....

And yeah I still need to get better at the light. On the sportsman its like "ok go on the last yellow, ok, yellow, yellow, yellow, green, shit it's green , go ,go, go. Damn"

PORTED R · « **Reply #7 on:** March 07, 2014, 04:13:43 PM »

I be sleeping at the light ...ha
But I wanna run Santa Maria this year ,track terrain looks good
Started to mess with my jetting
I'm running the same jets in my 370 that I had in my 310 ,maybe leaner needle
Crazy ,just need some bigboy sprockets

Rupp250 · « **Reply #8 on:** March 07, 2014, 04:30:25 PM »

I checked on that bar and it sold. I may be able to pick up a 4 bar though.

johnny22 · « **Reply #9 on:** March 07, 2014, 05:11:27 PM »

the light is hard to get used to. I did exactly what you just explained when I went to santa maria for the tnt. really aj? what jetting are you at if you don't mind me asking

PORTED R · « **Reply #10 on:** March 07, 2014, 06:13:04 PM »

180 main ,50 pilot ,third clip on needle
I ran 4th clip on my 310 ,on the 370 I'm running the 3rd (leaner)

I'm also running a wider gap on my plug

johnny22 · « **Reply #11 on:** March 07, 2014, 06:24:49 PM »

Dang! I run a 190 main 52 pilot and needle on the third clip.wait what carb do you run? That probably makes a difference

oldschool85250r · « **Reply #12 on:** March 07, 2014, 07:26:42 PM »

I hope I can get my bike back together by then. I need to get some more tnt didn't get much at Bako sand drags

PORTED R · « **Reply #13 on:** March 07, 2014, 09:14:21 PM »

I run a 38 A/S
And I probably could go leaner if I could get it back to nate on the Dyno
But I've heard Russell has small jets in his 40 carb

johnny22 · « **Reply #14 on:** March 07, 2014, 09:42:34 PM »

Hmm maybe I'm running too rich haha im not sure