TRX250r.org

Author Topic: Some old pics of CP Industries facility  (Read 9691 times)

Offline rsss396

Some old pics of CP Industries facility
« on: March 21, 2014, 10:14:04 AM »
I forgot about these pics on plantsand back when Charlie Ohton visited CP Industries, thought you guys might enjoy.




Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline rsss396

Some old pics of CP Industries facility
« Reply #1 on: March 21, 2014, 10:17:21 AM »
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline rsss396

Some old pics of CP Industries facility
« Reply #2 on: March 21, 2014, 10:20:57 AM »
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline rsss396

Some old pics of CP Industries facility
« Reply #3 on: March 21, 2014, 10:25:59 AM »
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline rsss396

Some old pics of CP Industries facility
« Reply #4 on: March 21, 2014, 10:33:01 AM »
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline Rupp250

Some old pics of CP Industries facility
« Reply #5 on: March 21, 2014, 11:16:59 AM »
I'll take the special for the chick for 1 please.

Awesome pics.
DRAG- Puma in a Ziggy Chassis
TRAIL -86  250R ported stock cylinder
DUNER -86 250R  Flinstone

Offline C-Leigh Racing

Some old pics of CP Industries facility
« Reply #6 on: March 21, 2014, 11:18:47 AM »
That is some good informative pics Dave.
Will give those that dont know, a good idea why things cost as much as they do in the USA, because of all the work that has to go into it to have a finished product.

Now if all that was like happening in Japan or China, where the peoples mind set is to honor their country & will do the work for just about nothing to reach that goal, things can be a lot cheaper. If you go that route though, what is it doing for our country.

Really got to give praise though, for all Calvin has done for us for so many years, like a little piece of history for us to remember him by.
Thanks Dave, Neil
C-Leigh Racing, in memory of Caraleigh Pritchard
Race team for 2015
Chuckie Creech #25 TRX450R, Pro, Pro Am, Pro Am Unlimited
Andrea Creech # 25 TRX450R, Womens (National ATVA EDT)
Andrea Creech #33 TRX350R, Womens (local EDT)

If it aint got a hot weed eater 2 stroke engine, all its good for is a pit bike

Offline fx4pitrone

Some old pics of CP Industries facility
« Reply #7 on: March 21, 2014, 11:20:25 AM »
Those are freakin sweet!!  Thanks for sharing!

Offline havinnoj

Some old pics of CP Industries facility
« Reply #8 on: March 21, 2014, 11:45:30 AM »
Love the pics!

Offline etccb

Some old pics of CP Industries facility
« Reply #9 on: March 21, 2014, 12:06:48 PM »
It is interesting to see the ins and outs of the molds and see how these castings are done.

Offline sameltoe

Some old pics of CP Industries facility
« Reply #10 on: March 21, 2014, 12:10:03 PM »
Thanks for the pics! That is really kewl!
I was lucky enough to take a tour of a local foundry when we were in welding school.
Arens, Arsfx, BHP363
Arens, lsr dc2 no link, lsr dc4, BHP363

Offline Tbone07

Some old pics of CP Industries facility
« Reply #11 on: March 21, 2014, 02:14:24 PM »
Wow those are some awesome pics......clears up some questions I had about how cylinders are cast. Great recon work Dave :encouragement:
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline JTRtrx250r

Some old pics of CP Industries facility
« Reply #12 on: March 21, 2014, 02:51:21 PM »
Way cool!
- Jeremy -

Big Thanks to Pest/ hoppedrap, wont ever forget!!

Offline jcs003

Some old pics of CP Industries facility
« Reply #13 on: March 21, 2014, 03:37:06 PM »
very very awesome!!

i also find the tool magazine in the pics interesting.  i am guessing that is a Haas tool magazine...?

thanks for sharing dave.

john

Offline Higgy87trx425

Some old pics of CP Industries facility
« Reply #14 on: March 23, 2014, 11:46:37 PM »
Great pics thanks!! I believe I could work there!!!!!!!!!!
 Thanks Higgy

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38