I designed and fabricated some custom beefy case savers for my quads, as I did not care for any of the aftermarket ones available. My buddies all wanted one as well, so I figured I would see if there was any interest in making a batch of them. I am looking at about $35 + shipping. I currently have 2 variations: 13T and 14T. They are machined out of 6061-T6, are 1/2 inch thick, bolt on using existing hardware (assuming you have 8mm or allen heads), and do not require a spacer. They have worked great on my bikes so far.
Let me know what you think, and if there is enough interest I will have some more machined. Also, let me know if you prefer a 13T or 14T. Thanks!