TRX250r.org

Author Topic: 2014 Pumashine 88/89 Seat Latch question  (Read 1090 times)

Offline ATVRacing2

2014 Pumashine 88/89 Seat Latch question
« on: April 22, 2014, 06:22:51 PM »
I have your gusset kit for an 1988 OEM 250R frame and saw that my stock OEM seat latch will not work with the rear grab bar reinforment gusset installed. I was curious which 2014 Pumashine seat latch do I need to use for a 1988 250R with a standard seat foam?? I see on your website you have a 86/87 short cushion, 86/87 tall cushion and a 88/89 tall cusiohn but not a 88/89 short cushion. I have a stock OEM seat cushion so would that be a 88/89 short cushion I need? Any help would be very much appreciated. Thanks.
« Last Edit: May 30, 2015, 08:44:46 PM by ATVRacing2 »

Offline Pumashine

2014 Pumashine 88/89 Seat Latch question
« Reply #1 on: April 22, 2014, 07:47:56 PM »
The 88 and 89 frame have the tall cushions and the 88/89 seat latch is set for those. Thanks, Tony
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38