TRX250r.org

Author Topic: is this a Pumashine product?  (Read 9547 times)

Offline croat1

is this a Pumashine product?
« on: June 01, 2014, 10:55:53 PM »
I cannot remember who made these for me.....after searching around the only thing I can think of is that Pumashine offered these years ago????  So, Tony is this your work?  
thanks
joe

Offline bnau267

is this a Pumashine product?
« Reply #1 on: June 01, 2014, 11:30:52 PM »
What are those?

Offline Bigred

is this a Pumashine product?
« Reply #2 on: June 01, 2014, 11:39:23 PM »
Look to be frame patches for the bottom front of the frame
1986 R
260cc oem cylinder
tc ported
38mm as carb
boyseen reeds
Ohlins front shocks
redone oem rear shock
93 pump fuel
cool head inline temp gauge

Offline croat1

is this a Pumashine product?
« Reply #3 on: June 01, 2014, 11:54:16 PM »
yep, what bigred said. upper and lower repair plates for the front of an OEM frame (between the a arms). I have seen many oem frames rusted thru in that section of the frame.  in the old days most guys did not run full skid plates (at least the ones I have seen in Ohio) and thus ruined the bottom of the frame.  Damn woods riding lol.

Offline Pumashine

is this a Pumashine product?
« Reply #4 on: June 02, 2014, 12:24:51 AM »
Yes, I used mine, worked great.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline croat1

is this a Pumashine product?
« Reply #5 on: June 02, 2014, 12:31:03 AM »
ok good to know.  I cannot stand having parts and not knowing who made them...old age is setting in.  I actually forgot that I had these....found them in a box of misc. items.  the frame I was going to use one for them on was beyond repair (bent and cracked in many places).  
Joe

Offline Pumashine

is this a Pumashine product?
« Reply #6 on: June 02, 2014, 12:34:19 AM »
Quote from: croat1;35561
 I actually forgot that I had these....found them in a box of misc. items.  the frame I was going to use one for them on was beyond repair (bent and cracked in many places).  
Joe

LMAO, I have not yet used the frame those fixed!!!!
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline Legacy 1904

is this a Pumashine product?
« Reply #7 on: March 25, 2015, 11:16:35 AM »
Where do I find 1 of these?

Offline Pumashine

is this a Pumashine product?
« Reply #8 on: March 25, 2015, 11:52:27 AM »
Quote from: Legacy 1904;52147
Where do I find 1 of these?
Welcome to the site. Someone was asking about these about a month or 2 ago. They had gotten misplaced but I finally found them. If that was you let me know. I get many requests by email, PM here and Message on FB. The guys on FB are just too stupid to work with. If you order from there (FB) I will proly not ever make the part. If you ask in this forum you will get help from everyone here. I will have to figure what it costs to make these. Originally Joe saw my rebuild thread on the old site and ordered 2 sets so I made 4 or 6 sets.  Please send a PM so I have a record of the request. Thanks, Tony
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline Legacy 1904

is this a Pumashine product?
« Reply #9 on: March 25, 2015, 01:19:20 PM »
No it wasn't I but someone turned me onto this page because I have a frame that's real bad.
  Was curious of the cost of these repair plates. I found another frame but wouldn't mind repairing the old one if possible.
  Couldn't figure out how to send a PM on here. Thanks a bunch.

Offline Pumashine

is this a Pumashine product?
« Reply #10 on: March 25, 2015, 05:29:55 PM »
Quote from: Legacy 1904;52157
Couldn't figure out how to send a PM on here. Thanks a bunch.
If you click the persons screen name you will get 5 options. Just click the Private Message.

Alot of work went into these. Proly took me 2 weeks of time to cut measure program and come up with a good part. These 4 piece sets are going to be $50 shipped. I know it may not be cost effective as you may find a frame for $100. There are hours of cutting  the old frame apart. The bottom piece has 4 drain holes punched in it so this does not happen again.



« Last Edit: March 25, 2015, 09:44:08 PM by Pumashine »
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline AJ777

is this a Pumashine product?
« Reply #11 on: January 29, 2017, 06:03:21 PM »
It was me that asked if you had any more left. I emailed you about those repair plates and you said you had to look around cause you did that project awhile back.

Offline Pumashine

is this a Pumashine product?
« Reply #12 on: January 29, 2017, 09:36:22 PM »
Quote from: AJ777;71605
It was me that asked if you had any more left. I emailed you about those repair plates and you said you had to look around cause you did that project awhile back.
I have 4 sets and 100 questions. But when I ask for $50 a set everyone disappears. Thats a great price and have not sold a set. I recommend buying a used frame for $300-$400. These are a lot of work to put in.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline TRXjeeper

is this a Pumashine product?
« Reply #13 on: January 30, 2017, 10:33:53 PM »
I think that's a great price ! I mean there is material cost, water jet time and press brake time involved in them.
Wicked Metal Designs for all your custom powder coating,machining, frame repair and welding needs.   Send me a PM for a quote

Offline Sand_Blaster

Re: is this a Pumashine product?
« Reply #14 on: November 22, 2017, 09:54:51 PM »
Tony would u happen to have any of these patch kits on hand still? I need a set for my frame.
87 Trx250r & 99 Banshee

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38