Author Topic: Looking for Pics of how people Bolt up Stock rear fender brace/bar to maier rears (Read 3191 times)

TatTooL23 · « **on:** July 11, 2013, 12:01:33 AM »

I have a set of Maier rear fenders, and have the OEM rear fender brace bar. i just would like to c how people are attaching it to the lower rear fenders. i know they come with "L" brackets, but i guess u have to drill ur own holes. just curious. help me out. thanks

mx250r91 · « **Reply #1 on:** July 11, 2013, 06:03:06 PM »

Here's mine. This is the left side. Excuse the dirt.

Sky · « **Reply #2 on:** July 12, 2013, 09:42:25 AM »

I had such a hassle with mine I left them off. The Maier are strong enough and reinforced in the seam that i just left it off.

mx250r91 · « **Reply #3 on:** July 12, 2013, 12:12:28 PM »

I found the bracket really helps keep the fenders off the exhaust and from melting when they get weighed down with a ton of mud and when jumping.

2strokesforever · « **Reply #4 on:** July 12, 2013, 10:47:07 PM »

I have Pro Circuit pipe and Silencer dont run the fender brace and that kind of pipe setup doesnt ride on fender

TatTooL23 · « **Reply #5 on:** July 19, 2013, 08:59:00 AM »

got them on. worked fine. here r some pics

[ATTACH=CONFIG]743[/ATTACH][ATTACH=CONFIG]744[/ATTACH][ATTACH=CONFIG]745[/ATTACH][ATTACH=CONFIG]746[/ATTACH][ATTACH=CONFIG]747[/ATTACH][ATTACH=CONFIG]748[/ATTACH]

mx250r91 · « **Reply #6 on:** July 19, 2013, 09:30:40 AM »

Looks good!

Rupp250 · « **Reply #7 on:** July 19, 2013, 04:03:36 PM »

Looks good man

TLR-Online · « **Reply #8 on:** July 19, 2013, 10:18:37 PM »

Maier also sells "heat tiles" to help protect the plastics from the silencer: https://www.maier-mfg.com/catalog/6-x-12-heat-tile-kit

sameltoe · « **Reply #9 on:** July 19, 2013, 11:46:57 PM »

Didn't know maier made that! Thought I would share what I used. 25$ for 2 12"×12" pieces. So far so good...

Well where'd the pic go??