Spare Tranny parts....

[Pumashine]

I'd be interested in it, I owe Mr McCoy one.

 My standard asking price for discontinues parts or any part is 1/2 the new price. So if you look at the price in this link and divide by two you will know how much I am asking. http://www.partzilla.com/parts/search/Honda/ATV/1986/TRX250R+A/TRANSMISSION/parts.html

[silverlake250r]

Tony, do you want to sell me both or do you want me to buy the end washer that is still available from the dealer?

[Pumashine]

Tony, do you want to sell me both or do you want me to buy the end washer that is still available from the dealer?

Both is fine, you would pay more for shipping than the part itself.

[silverlake250r]

Total on the site you posted a link to is 7.29, half of that is 3.65. Let me know the total including shipping,. Thanks!!

[ccaiazza]

Tony did you ever find that clutch cable holder that bolts to the case?

[Pumashine]

Total on the site you posted a link to is 7.29, half of that is 3.65. Let me know the total including shipping,. Thanks!!

Mailed with a forever stamp so shipping was cheap, no charge as I know you help out the rest of us and you would do the same.

[Farmboy1979]

I have this one

$55?

[Pumashine]

$55?

Yes, $53 +shipping, but do you have the bushing it rides on? If you are in a hurry I can ship right away. Otherwise we can do it when I get your polished resi clamps done.

[silverlake250r]

Mailed with a forever stamp so shipping was cheap, no charge as I know you help out the rest of us and you would do the same.

Thanks a ton Tony, you're the best!

[Farmboy1979]

Yes, $53 +shipping, but do you have the bushing it rides on? If you are in a hurry I can ship right away. Otherwise we can do it when I get your polished resi clamps done.

Not a huge hurry, I can wait.  Thanks. ETA?

[Anthony0327]

I am a mechanical engineer, figuring out the materials is a no brainer.   The hard part is figuring out how to make small runs of gears,  transmission shafts, special splined sleeves, thrust washers, forks etc at a price customers can afford.  I have the machinery it takes to make these parts. I cannot compete with Hondas retail prices making a small runs of one particular gear or shaft etc.  We have to remember that when Honda makes these parts they make thousands of one part number and then makes thousands of the next part number.  If enough customers are willing to pay 2 to 3 times Hondas retail price for these parts I would consider making the necessary tooling to produce these parts.   The after market gears that are currently being made are the easy ones to make and are selling for about $150 to $175 each.

If you or anyone else is willing to start making parts I will def buy them. Parts are hard to find especially good ones and when you do people rape you on the price anyway. Mite as we'll get new ones for that kind of money.

[Bio86]

Is there anything in the CR250/500 that has identical parts at all?  I'm assuming no because they probably have different ratio's and altogether different but figured id ask.

[Pumashine]

Bubba needs "I need the 2 maninshaft sliders to install with the new gears so they will mate good and give a good wear pattern. I want to give the best feedback I can. The Honda numbers are 23491-HA2-010 and 23511-HA2-000"

I will check today and see