TRX250r.org

Author Topic: LED Intake and 350G pipe on a Lobo Frame  (Read 10140 times)

Offline 2ndmoto

LED Intake and 350G pipe on a Lobo Frame
« on: August 22, 2014, 12:08:57 AM »
There was some interest in how the LED intake fit the Roll Design Lobo frame. I thought I would share some pictures.



Plenty of clearance around the plastics (old Fullbore), frame and head-to-pump coolant hose. I did end up running a different coolant hose that runs from the pump to the radiator. There are some frame supports that push the stock hose too close to the pipe. It is a Gates hose Part# 19707. Had to do a little trimming, but it fit well.

There might be a better hose out there, but this was available at the auto parts store...and, come hell or high water, I was going riding the next day. The crude exhaust bracket was my own design, as Roll failed to design a frame with an exhaust mount. I had to run this bracket back to the gas tank mount. I'll have LED fab me up something soon.

Here is the Intake. LED does make a few different ones. This one is specific to the Lobo chassis. It is tight, but there is clearance from the shock being fully extended to bottomed out. I am going to see about getting an air box made.




If you would like to see any specifics, let me know.


Best Regards
-Jason

Offline ytman

LED Intake and 350G pipe on a Lobo Frame
« Reply #1 on: August 22, 2014, 10:19:04 AM »
awesome bike. Great pics. Thank you.

Offline Flyin_250r

LED Intake and 350G pipe on a Lobo Frame
« Reply #2 on: August 23, 2014, 09:40:08 PM »
Sick lobo. That danhung's old chassis?  I'd love a intake to mount to a stock airbox.  I don't think I'm alone on that matter either lol

Offline bnau267

LED Intake and 350G pipe on a Lobo Frame
« Reply #3 on: August 23, 2014, 10:25:46 PM »
You are not alone

Offline 2ndmoto

LED Intake and 350G pipe on a Lobo Frame
« Reply #4 on: August 24, 2014, 05:57:52 AM »
You guys running lobos? I'll be going over to LED in a week or two. I'll see if Arlan has interest in building them.

Best regards
-Jason

Offline Flyin_250r

LED Intake and 350G pipe on a Lobo Frame
« Reply #5 on: August 24, 2014, 09:53:14 PM »
Yeah I am

Offline Dirt man

LED Intake and 350G pipe on a Lobo Frame
« Reply #6 on: August 25, 2014, 12:14:30 AM »
How about one for a no link lrd frame?  Or do I have to modify a stock frame led intake to fit my lrd frame?
It goes fast over bumps too!

Offline Flyin_250r

LED Intake and 350G pipe on a Lobo Frame
« Reply #7 on: August 29, 2014, 07:39:25 PM »
Quote from: 2ndmoto;41659
You guys running lobos? I'll be going over to LED in a week or two. I'll see if Arlan has interest in building them.

Best regards
-Jason

Man I need those pegs and nerfs bad lol. Did you get the heel guards Dan had with them also?

Offline 2ndmoto

LED Intake and 350G pipe on a Lobo Frame
« Reply #8 on: August 29, 2014, 11:29:49 PM »
No heel guards. Are the nerfs hard to find?  It is getting ripped down soon for a color change.


On the LRD Frame, I am not sure. I know the tubing is larger than a stock frame. So it would need a different mount. As far as fitting the frame, you would have to call Arlan and ask. But I will ask him next time I see him.

Best Regards
-Jason

Offline Flyin_250r

LED Intake and 350G pipe on a Lobo Frame
« Reply #9 on: August 30, 2014, 09:17:07 AM »
Quote from: 2ndmoto;41950
No heel guards. Are the nerfs hard to find?  It is getting ripped down soon for a color change.


On the LRD Frame, I am not sure. I know the tubing is larger than a stock frame. So it would need a different mount. As far as fitting the frame, you would have to call Arlan and ask. But I will ask him next time I see him.

Best Regards
-Jason


I haven't looked too deep yet, but probably. The roll pegs are I think the only roll part I'm not running yet due to wanting nerf bars.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38