TRX250r.org
« previous next »
Pages: [1]   Go Down

Author Topic: Kevin Cameron talking detonation  (Read 3669 times)

Offline rsss396

Kevin Cameron talking detonation
« on: October 22, 2014, 12:10:16 PM »
Logged
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline Jerry Hall

Kevin Cameron talking detonation
« Reply #1 on: October 22, 2014, 06:31:47 PM »
Quote from: rsss396;44875
Kevin Cameron talking detonation  http://books.google.com/books?id=wHSDST9VvU8C&pg=RA2-PA18&lpg=RA2-PA18&dq=Harry+Ricardo+detonation&source=bl&ots=x3frPOE8Dg&sig=LiQFN6u8wOhL6W_0dHNoqmUbGoI&hl=en&sa=X&ei=rNRHVLHQBceGyAS7lYKwCA&ved=0CCsQ6AEwBA#v=onepage&q=Harry%20Ricardo%20detonation&f=false

This article has a very good explanation of how detonation occurs and why it can destroy an engine in a matter of seconds if it is allowed to continue.  I would recommend everyone that does not understand the process Kevin Cameron described, to read and re-read the article until you do understand.  The majority of the heat related piston failures are caused by detonation.
« Last Edit: October 23, 2014, 01:06:54 AM by Jerry Hall »
Logged

Offline mandom250r

Kevin Cameron talking detonation
« Reply #2 on: October 22, 2014, 07:58:59 PM »
wow very good article here, im one of those that need to re-read. :confusion:
Logged
Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38