TRX250r.org

Author Topic: resi clamps  (Read 6208 times)

Offline charlesrainey

resi clamps
« on: December 04, 2014, 03:57:26 PM »
Would like to order a set (of clamps that is). How do I do this?

Offline FerrinMotorsports

resi clamps
« Reply #1 on: December 04, 2014, 04:07:14 PM »
Contact Pumashine on the list here...He needs to know your specs such as reservoir diameter etc

Offline Pumashine

resi clamps
« Reply #2 on: December 04, 2014, 04:07:56 PM »
Quote from: charlesrainey;47063
Would like to order a set (of clamps that is). How do I do this?
PM sent. You have to measure the rezi's and give me the measurements. I will send you an invoice through paypal when I am building them.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline z71mike

resi clamps
« Reply #3 on: February 10, 2015, 12:33:46 AM »
Tony - I need a set for my 86.

Edit:  Just saw the other thread.  I'll post there.

Tone - My works rezzies are 1.822in diameter. I'll need 4 clamps.
« Last Edit: February 10, 2015, 01:05:31 AM by Pumashine »

Offline Pumashine

resi clamps
« Reply #4 on: February 10, 2015, 12:56:50 AM »
Quote from: z71mike;50026
Tony - I need a set for my 86.

Edit:  Just saw the other thread.  I'll post there.
Just need to know the diameter of the resi. Thanks, I posted the info from the other thread.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline z71mike

resi clamps
« Reply #5 on: February 10, 2015, 05:45:16 PM »
Just let me know how you want to proceed.

Offline Pumashine

resi clamps
« Reply #6 on: February 10, 2015, 07:52:48 PM »
Quote from: z71mike;50043
Just let me know how you want to proceed.
I am running 4 orders right now. You will have to wait until the next run. After I cut them I will contact you. Thanks, Tony
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline charlesrainey

resi clamps
« Reply #7 on: February 10, 2015, 07:56:52 PM »
Sounds good. Thanks.

Offline z71mike

resi clamps
« Reply #8 on: February 10, 2015, 07:57:03 PM »
No problem, brotha.  Understood.

Offline Pumashine

resi clamps
« Reply #9 on: February 10, 2015, 08:23:55 PM »
Quote from: charlesrainey;50047
Sounds good. Thanks.
Yours are ready to tap and bead blast Charles. Can have them finished tomorrow.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline charlesrainey

resi clamps
« Reply #10 on: February 10, 2015, 08:40:00 PM »
Great. Not sure how payment works? Paypal?

Offline Pumashine

resi clamps
« Reply #11 on: February 10, 2015, 08:52:39 PM »
Quote from: charlesrainey;50050
Great. Not sure how payment works? Paypal?
Most people use paypal on the forums and face book. You just send me your paypal address in a private message and I will then send an invoice to you.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Pumashine

resi clamps
« Reply #12 on: February 10, 2015, 08:54:28 PM »
Quote from: z71mike;50048
No problem, brotha.  Understood.
I will be doing yours soon as I have to cut a Liger spacer for a Suzuki from 1/2" material this week or weekend.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline z71mike

resi clamps
« Reply #13 on: February 10, 2015, 08:56:37 PM »
Sweet

Offline Leftynanners

resi clamps
« Reply #14 on: February 11, 2015, 02:01:22 AM »
Is there any way I can be put on the waiting list for the next run on these? I would like to order 4. My rezzies measure 55mm in diameter. I want to mount them on the subframe of an oem frame