Author Topic: Mac's 2014 LSR Build. (Read 16942 times)

Mac · « **Reply #30 on:** March 10, 2015, 03:14:02 PM »

Quote from: Mac;49258

Lets hope it doesn't get damaged this time around UPS LOL :rolleyes:

Well i ****ing jinxed myself. **** YOU UPS. IM PISSED NOW. SECOND TIME THIS HAPPENED!!!!

JesseA420 · « **Reply #31 on:** March 10, 2015, 03:38:38 PM »

if that was mine, i would freak out. that is a bummer look at that sexy powder all chipped to hell.

Mac · « **Reply #32 on:** March 10, 2015, 05:57:13 PM »

Quote from: JesseA420;51299

if that was mine, i would freak out. that is a bummer look at that sexy powder all chipped to hell.

Trust me, I freaked out before. Im beyond pissed and Im giving them one more chance to fix it (not saying it wasn't fixed at LSR shop) and get it back to me with no problems like this or i will be getting a partial refund soo i can send it to a local shop to fix the bends and get it re-powdered.
I love the color and the powder is amazing, except for that little spot near the bent piece.

Hawaiiysr · « **Reply #33 on:** March 10, 2015, 11:05:03 PM »

Dang dude sorry to hear its the second round. 3 times a charm. Fingers crossed for you buddy

Mac · « **Reply #34 on:** March 10, 2015, 11:52:54 PM »

Quote from: Hawaiiysr;51326

Dang dude sorry to hear its the second round. 3 times a charm. Fingers crossed for you buddy

Thanks man! I need all the luck i can get at this point. Thank you!!

Hopefully 3 times the charm

udontknowme · « **Reply #35 on:** March 18, 2015, 12:59:55 AM »

3mon later and 2 bent frames. i dont even know what to say. root of the problem is lsr doesnt package it correct. needs to be in some type of reinforced crate. wood, metal or other wise. was thinking of doing a lsr myself but i couldnt handle going through this same bs

dem3500 · « **Reply #36 on:** March 20, 2015, 08:47:54 AM »

If lsr will be giving you a partial refund to take it to a local powder coater i would do that for sure! Whoever is doing the PC for lsr is doing a really crappy job! Properly applied PC should not flake off. I've sprayed test pieces of metal in the past where I was able to bend the metal complete back on itself and it did not chip,crack, or flake. Its all in the prep work. I've seen it before. Powder looks good but once it gets dinged it will endlessly flake off. Talk to your PC guy and ask what he does for prep work before you give him your frame to do. Post back here and lll let you know of he's doing the proper prep work to make the PC last like it should

Mac · « **Reply #37 on:** March 21, 2015, 05:31:56 PM »

Quote from: udontknowme;51726

3mon later and 2 bent frames. i dont even know what to say. root of the problem is lsr doesnt package it correct. needs to be in some type of reinforced crate. wood, metal or other wise. was thinking of doing a lsr myself but i couldnt handle going through this same bs

Honestly now i dont know who to blame. I think its a combination of both LSR and UPS. I mean like, LSR doesnt have the best packing skills and UPS throws the boxes around soo its both of their faults i would say. The box was damaged to some degree and the frame could of used more foam to protect it. I just want my frame not damaged so i can start the build...

Mac · « **Reply #38 on:** March 21, 2015, 05:33:58 PM »

Quote from: dem3500;51880

If lsr will be giving you a partial refund to take it to a local powder coater i would do that for sure! Whoever is doing the PC for lsr is doing a really crappy job! Properly applied PC should not flake off. I've sprayed test pieces of metal in the past where I was able to bend the metal complete back on itself and it did not chip,crack, or flake. Its all in the prep work. I've seen it before. Powder looks good but once it gets dinged it will endlessly flake off. Talk to your PC guy and ask what he does for prep work before you give him your frame to do. Post back here and lll let you know of he's doing the proper prep work to make the PC last like it should

If my frame comes back one more time damaged i will be getting a partial refund to get it fixed and powdered by my local shop. I hope it doesnt come to that though. I need all the luck i can get at this point...

croat1 · « **Reply #39 on:** March 21, 2015, 06:02:04 PM »

hoping the best for you.....but damn!!! a little common sense from the guys that packed it. I send a $5 part and it is packed like it can drop from a plane with no damage. SMH

Joe

Mac · « **Reply #40 on:** March 25, 2015, 09:39:50 PM »

Quote from: croat1;51945

hoping the best for you.....but damn!!! a little common sense from the guys that packed it. I send a $5 part and it is packed like it can drop from a plane with no damage. SMH

Joe

Thanks for the luck man. I need it. Common sense isnt that common when it comes to packing i guess. LMFAO

broken1 · « **Reply #41 on:** March 26, 2015, 12:16:29 AM »

Quote from: Mac;52181

Thanks for the luck man. I need it. Common sense isnt that common when it comes to packing i guess. LMFAO

Common sense isn't that common period.... Hopefully they make it right on the third try.

Mac · « **Reply #42 on:** March 31, 2015, 11:18:52 PM »

Quote from: broken1;52187

Common sense isn't that common period.... Hopefully they make it right on the third try.

hahahaha! i hope soo. ill update as soon i get my frame back. Keep an eye out for it. In the next week or soo i should have the frame back

JesseA420 · « **Reply #43 on:** April 27, 2015, 12:07:33 PM »

any luck on the 3rd go around with them?

Mac · « **Reply #44 on:** May 01, 2015, 01:34:31 AM »

Quote from: JesseA420;53746

any luck on the 3rd go around with them?

i haven't received my frame back yet -_- sadly.
I will post an update when i get it back.
Im praying my ass off that its comes back in perfect condition. I just wanna start building it up