TRX250r.org

Author Topic: a arm skid plates  (Read 4012 times)

Offline dem3500

a arm skid plates
« on: January 07, 2015, 08:52:48 AM »
Does anybody run skid plates on there lower a arms? Just trying to decide if I should buy a set or not.
Facebook.com/toonutzcreations

Offline ytman

a arm skid plates
« Reply #1 on: January 07, 2015, 03:17:14 PM »
If you run in the rocks they can be an arm saver. Plus if you want to sell your arms the value is higher. Who wants a arms that are beat to you know what on the bottom.

Offline fx4pitrone

a arm skid plates
« Reply #2 on: January 07, 2015, 03:22:13 PM »
Anyone make any for aftermarket arms or know any that fit?  I don't think I e ever seen any....

Offline dem3500

a arm skid plates
« Reply #3 on: January 07, 2015, 03:38:30 PM »
That's a good point. Cheap insurance.

I was wondering the same thing. I'm going to ask JD since that's the arms I have. Otherwise I'd get a set of off the shelf ones and modify them. I don't really like the clamp on style any way
Facebook.com/toonutzcreations

Offline Tbone07

a arm skid plates
« Reply #4 on: January 07, 2015, 03:52:50 PM »
I vaguely remember someone offering polyurethane a-arm skid plates, I believe it might have been Maier but not sure.

Polyurethane would be perfect because of it's light weight
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline dem3500

a arm skid plates
« Reply #5 on: January 07, 2015, 04:03:56 PM »
I'll check. Kased plates makes a Polly belly skid I'm going to get. I could probably ask him about the arms also
Facebook.com/toonutzcreations

Offline dem3500

a arm skid plates
« Reply #6 on: January 07, 2015, 08:42:02 PM »
I neglected the fact that there JD MGC arms. Dave says I have to make my own
Facebook.com/toonutzcreations

Offline ytman

a arm skid plates
« Reply #7 on: January 08, 2015, 12:12:17 AM »
I had to make them for the Rolls. Those MGC's will be tricky.

Offline dem3500

a arm skid plates
« Reply #8 on: January 08, 2015, 05:34:00 AM »
Those look nice. I'll figure out something for em.
Facebook.com/toonutzcreations

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38