TRX250r.org

Author Topic: Need 89 full gusset kit set-up for 04/05 450r swinger  (Read 1830 times)

Offline Rush_NH

Need 89 full gusset kit set-up for 04/05 450r swinger
« on: July 17, 2013, 07:47:06 PM »
Pumashine,
As I mentioned in my e-mail, I'd like to purchase a full gusset kit for my 89 oem trx250r frame. However, I am working with GT thunder to incorporate an 04/05 trx450r swinger.  To do this, I will be removing the rear/upper engine mount from my frame and going with an 86 250r rear engine / swinger mount.  I am new to R's so bear with me a little.  I am wondering what parts if any in your complete 88/89 kit I will not need, and will I need anything from your 86 kit?  Thought you or someone else out there would know a bit more about this than I.  Thanks.  I hear great things about your product.  Congrats on the new forum BTW.

PS.  Also hoping you had a leftover 86 rear engine / swinger mount I could purchase and have shipped all at the same time.  Judging from your posts you seem to have a lot of R "stuff".

Offline Pumashine

Need 89 full gusset kit set-up for 04/05 450r swinger
« Reply #1 on: July 17, 2013, 11:38:44 PM »
I returned your e-mail. The swing-arm reinforcement is the same on the 86 as the 88 and 89. If you do not want those parts that is fine. Can make you up a partial set if needed. I purchase those 85-87 rear motor mounts off ebay as they have been discontinued if I see a good deal. I probably have 3 of them. But they are painted high quality black polyurethane for $30 each. I can post pics if you want.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38