Author Topic: What's wrong with this pic??? (Read 6311 times)

RenoNJ · « **on:** April 19, 2015, 01:05:34 PM »

I've never ram an after market axle. This was on there when I bought it. Seems like the fade nut is backwards and the brass ring is not needed

RenoNJ · « **Reply #1 on:** April 19, 2015, 01:06:15 PM »

Pic came out upside down.. ooppss

Pumashine · « **Reply #2 on:** April 19, 2015, 01:54:27 PM »

The lock nut has to have something to push against. As long as it works is all that needs to happen.

2ndmoto · « **Reply #3 on:** April 19, 2015, 03:05:29 PM »

Did you lose the retaining ring on the axle?

Best regards
-Jason

thesmith87250r · « **Reply #4 on:** April 19, 2015, 03:08:25 PM »

That is installed backwards

RenoNJ · « **Reply #5 on:** April 19, 2015, 03:17:07 PM »

I have no clue. I've always ran a stock axle with my quads. I know nothing about this setup

thesmith87250r · « **Reply #6 on:** April 19, 2015, 03:22:39 PM »

Looks like the same one i have. Pm me your # i can send ya a pic.

thesmith87250r · « **Reply #7 on:** April 19, 2015, 03:39:04 PM »

It still needs the lock ring for axle .

thesmith87250r · « **Reply #8 on:** April 19, 2015, 03:53:46 PM »

RenoNJ · « **Reply #9 on:** April 19, 2015, 05:28:15 PM »

Any recommendations for swinger bearings... apparently they're destroyed now

jackpot583 · « **Reply #10 on:** April 19, 2015, 06:02:57 PM »

What swinger?

RenoNJ · « **Reply #11 on:** April 19, 2015, 06:32:06 PM »

Stock 87

jackpot583 · « **Reply #12 on:** April 19, 2015, 06:48:33 PM »

OEM still available. Honda Part number 91071-MA0-003.

RenoNJ · « **Reply #13 on:** April 19, 2015, 07:02:14 PM »

Thanks!

bholzgen · « **Reply #14 on:** April 20, 2015, 01:09:44 PM »

Thats the cheaper durablue nut. I have ran that exact setup and it is not on backwards. The orientation is opposite from most other manufacturers. They are machined for the retaining ring and can only go on one way.