TRX250r.org

Author Topic: Radiator clamp request  (Read 13835 times)

Offline mrtwidster1

Radiator clamp request
« on: July 31, 2015, 10:44:26 AM »
Tony, Can you water jet  billet style radiator clamps?
Thanks

Offline Fire1

Radiator clamp request
« Reply #1 on: July 31, 2015, 12:50:50 PM »
Billet hose clamps

Offline Hawaiiysr

Radiator clamp request
« Reply #2 on: July 31, 2015, 01:04:13 PM »
AN fittings?

Offline Fire1

Radiator clamp request
« Reply #3 on: July 31, 2015, 01:14:32 PM »
Quote from: Hawaiiysr;56640
AN fittings?

No , the guy on the other site was or is offering billet hose clamps. Looks like they could be water jetted.

Offline mrtwidster1

Radiator clamp request
« Reply #4 on: July 31, 2015, 01:21:31 PM »
Sorry did not describe in depth . Tim is correct, hose clamps

Offline Pumashine

Radiator clamp request
« Reply #5 on: July 31, 2015, 01:50:56 PM »
Quote from: mrtwidster1;56642
Sorry did not describe in depth . Tim is correct, hose clamps
Sorry, I did not get the hose part. Let me look at the product the guy on the other site is cutting when I get home this evening. . My IP address is blocked here at work. Or could one of you guys copy and paste what the other guy is doing?
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Pumashine

Radiator clamp request
« Reply #6 on: July 31, 2015, 04:33:15 PM »
Got it, whats the flat spot for?
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Fire1

Radiator clamp request
« Reply #7 on: July 31, 2015, 04:38:56 PM »
The one with flat spot goes on clutch cover for clearance. They come as set and one clamp with flat is included

Offline Pumashine

Radiator clamp request
« Reply #8 on: July 31, 2015, 04:41:02 PM »
OK got ya. I don't see a patient anywhere so I guess I can copy them no problem. Heres the one on ebay.
$78 for 6 or $14 each
BDT copies everyone else so there is not a problem with me copying them in return.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Pumashine

Radiator clamp request
« Reply #9 on: July 31, 2015, 05:15:08 PM »
Or maybe Carlos will send me the DXF file and I will cut for free for .org members only.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline StrokedAZ

Radiator clamp request
« Reply #10 on: August 01, 2015, 12:15:12 AM »
When you're done though u need to start hawking it relentlessly on ebay.  Include the words pipe, fenders, piston, and oil so it pops up every time lol. I LOVE that!

Sent from my Galaxy S5
86 TRX 250R

Offline Pumashine

Radiator clamp request
« Reply #11 on: August 02, 2015, 03:33:44 PM »
I made a program to cut. Looks like a minute each. Cost=$2.50


Another member is going to send me one so I get a the specifics straight.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline dem3500

Radiator clamp request
« Reply #12 on: August 02, 2015, 05:53:06 PM »
That's too cheap lol! Or are you saying $2.50 is what it costs you for 1 min of cut time?
Facebook.com/toonutzcreations

Offline mrtwidster1

Radiator clamp request
« Reply #13 on: August 02, 2015, 05:55:37 PM »
Wow. So guess you could do the one for the Carb also??:jumping0041:

Offline Pumashine

Radiator clamp request
« Reply #14 on: August 02, 2015, 06:08:40 PM »
Quote from: mrtwidster1;56705
Wow. So guess you could do the one for the Carb also??:jumping0041:
I am not seeing alot of adjustment on these. You would have to know the outside measurement of the manifold boot when carb is in there. Yes its do-able
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/