TRX250r.org

Author Topic: The Dream Build  (Read 9184 times)

Offline Anthony0327

Re: The Dream Build
« Reply #30 on: June 04, 2017, 03:04:03 PM »
Thanks guys. I will be on top of this thread again until it's finished. When I started this thread shortly after it was put on an indefinite hold buT now it's back on full steam ahead.

Offline Langbolt

Re: The Dream Build
« Reply #31 on: November 28, 2017, 12:17:40 PM »
Any Updates ??

:)

Offline Anthony0327

Re: The Dream Build
« Reply #32 on: November 28, 2017, 09:02:22 PM »
Well no Frame yet But should be here soon. Donít know if I posted this but I did away with my oem frame and will be using a Narrow cr500 link frame. Every part on this bike now will be brand new. Iíve acquired all the Nos parts I was missing since on here last. Soon as the frame comes the bike will be built and ridden. Wonít just sit I promise that. Soon as I get some pictures loaded I will update with some photos. Sorry all for the delay. Had overcome a few obstacles but am in the clear now. Been 4 years in the making but I will have what I believe one of the nicest builds seen in a very long time.

Offline Anthony0327

Re: The Dream Build
« Reply #33 on: February 21, 2018, 05:16:32 AM »
Back at it folks. Sorry for the delay. Here it is. Brand new Narrow CR500 link chassis. This is the final piece to the puzzle. Build will commence.

Offline croat1

Re: The Dream Build
« Reply #34 on: February 21, 2018, 05:21:25 AM »
Can't wait to see this one

Joe

Offline Anthony0327

Re: The Dream Build
« Reply #35 on: February 21, 2018, 06:43:40 AM »
This Chassis was just built and finished last month. Just got back from powder yesterday. Itís Bengal Red in this powder type or Red Baron in Prismatic.

Offline Action69

Re: The Dream Build
« Reply #36 on: February 21, 2018, 10:22:11 AM »
Looks awesome.enjoy..would you say the red you used is close to Oem ?i have a build Iím going to start and Iím looking for something as close as possible to Oem..thanks.

Offline Anthony0327

Re: The Dream Build
« Reply #37 on: February 21, 2018, 10:28:40 AM »
Action69, not sure if itís a match or even close. Itís a color Iíve seen on other older school builds and thatís what I wanted. Wasnít trying to replicate the factory color though. If you want an exact match pm me and I can put you in touch with a person who can tell you what you need to know. They had the colors reserved tonget the exact matches.

Offline Hawgpilot

Re: The Dream Build
« Reply #38 on: February 21, 2018, 01:18:19 PM »
This thing is going to be incredibly nice!  I look forward to see your progress and thanks for sharing!

Offline Anthony0327

Re: The Dream Build
« Reply #39 on: June 17, 2018, 07:46:35 AM »
So finally progress folks. Engines in arms are on, pipe and seat cover came and shocks are on the way. This one willl finally be done in the coming weeks. I have the swinger also but it had to go back to powder cause I screwed something up in a spot with the powder that was on there. 

Offline Hawaiiysr

Re: The Dream Build
« Reply #40 on: June 17, 2018, 06:23:01 PM »
she sure is purddy

Online Pumashine

Re: The Dream Build
« Reply #41 on: June 17, 2018, 07:26:08 PM »
Nice, how does the subframe fit?
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! Mounted with Cascade QUIET[/

Offline Anthony0327

Re: The Dream Build
« Reply #42 on: June 18, 2018, 05:02:49 AM »
Nice, how does the subframe fit?


Subframe fits perfect as it should. There where only a few small things that needed tweaking with this frame especially considering it is the first one ever made. . I couldnít be happier how it turned out. Everything fits nice and tight as it should. This frame also uses a thicker wall tubing then was used on the Laeger, lone stars and any other of the frames that were produced and still only weighs in at 33 pounds. Isf did an amazing job on this frame. Few small things were added such as the Cr coil mount and the screw on holder for the rear brake lever. Isf also addressed the vertical bends at the exhaust port for the pipe to fit. Now the exhaust clears the frame with ease. Itís no wonder this wasnít thought of yeas ago instead of having to wrestle with a tight fit.

Offline Anthony0327

Re: The Dream Build
« Reply #43 on: July 07, 2018, 09:29:18 AM »
So my shocks came in yesterday. Iím almost there. Still waiting on carb, exhaust flange, wheels & tires and my swinger from the shop from getting the bearings pressed in. I went With the Pep PB1 up front and the zps dual rate rear. These are really nice shocks. Didnít realize how much goes into setting them up the right way. Hopefully within the week I should have the rest of my parts and be ready to get this thing tuned and get going with it. Been a very long time with this build but it has all the parts I wanted and is right the first time round. I also had my seat covered with a gripper cover from fourwerx. Cbr Rad and RTC shrouds and handles levers are what I went with. Front end is on too just need to get the shocks put on today.  Coming out nice if I do say so myself.

Offline Anthony0327

Re: The Dream Build
« Reply #44 on: October 21, 2018, 11:18:04 AM »
Here it is folks. Finally coming together. Had a few hiccups but hope to be done very soon. I guess working with custom stuff itís to be expected. Front end and rear end is on and buttoned up. Did a leak down on my brand new engine and found out the cases were warped from the factory and wouldnít seal. So apart engine came yet again but is going back together as we speak. On the other hand building with all new parts has been a blessing. Nothing to rebuild and donít have to worry about itís service life to come. Long as I maintain it should be good to go for a long time to come.