TRX250r.org

Author Topic: Swingarm Fixture  (Read 1041 times)

Offline ytman

Swingarm Fixture
« on: October 10, 2015, 06:37:35 PM »
I had to make a fixture so I can fix a swingarm I tried to modify. I thought I could just cut the center out of a 88/89 and make a 86/87. Unfortunately there were complications. I used a stock 89 arm to get the dimensions right.

Offline ytman

Swingarm Fixture
« Reply #1 on: October 10, 2015, 10:11:12 PM »
Just a 1/2" thick disc of aluminum on each side of the swinger that my dad turned on his little lathe to put a lip on to locate. same on the front.