Author Topic: Bearing Carrier Question (Read 3719 times)

atv fan 28 · « **on:** October 10, 2015, 09:45:12 PM »

Can someone tell me which carrier is specifically for a 250R? I have one that was in my 88 and I have another that came with a LSR swingarm I just bought. I discovered that they are different in diameter where the brake stay goes on. It's about quarter inch difference. But everything else is the same.

atv fan 28 · « **Reply #1 on:** October 10, 2015, 10:17:54 PM »

Everything else appears to be the same..... far as fitting in the swingarms, bearing size and so forth. It's just the outside diameter on the end where the brake stay plate goes.

thesmith87250r · « **Reply #2 on:** October 10, 2015, 10:29:59 PM »

That's strange to me so you have different size brake stays ?

atv fan 28 · « **Reply #3 on:** October 10, 2015, 10:33:11 PM »

Yes, the stay and the clip are a different

thesmith87250r · « **Reply #4 on:** October 10, 2015, 10:39:50 PM »

Can ya take some pics an post em up . One of the carriers has to be from a different Honda atv

atv fan 28 · « **Reply #5 on:** October 10, 2015, 10:43:21 PM »

atv fan 28 · « **Reply #6 on:** October 10, 2015, 10:43:56 PM »

thesmith87250r · « **Reply #7 on:** October 10, 2015, 10:55:57 PM »

My opinion is the top one is not 250r atc or trx. I have never seen one with that much lip after the snap ring

Rupp250 · « **Reply #8 on:** October 10, 2015, 11:40:56 PM »

Is it a Banshee 40mm axle setup?

atv fan 28 · « **Reply #9 on:** October 10, 2015, 11:59:21 PM »

I don't have a clue. The one on bottom uses a single row bearing while the other has tapered bearings.

thesmith87250r · « **Reply #10 on:** October 11, 2015, 12:54:05 AM »

The top one is a 400ex carrier definitely.

thesmith87250r · « **Reply #11 on:** October 11, 2015, 12:55:10 AM »

Sorry brain don't work well when drinking lol. But its a 400ex

atv fan 28 · « **Reply #12 on:** October 11, 2015, 01:11:37 AM »

I have a 400EX carrier and it's the same size as the one on the bottom.

thesmith87250r · « **Reply #13 on:** October 11, 2015, 01:17:13 AM »

Sorry brain don't work well when drinking lol. But its a 400ex http://i.ebayimg.com/00/s/NjQwWDQ4MA==/$(KGrHqZ,!qoFDk0+SpffBQ91I1Qdlw~~60_1.JPG

rk88r · « **Reply #14 on:** October 11, 2015, 01:36:26 PM »

I have an Lsr, Rad, and Rpm Millennium carriers. All have different diameter snouts. The lsr is the same as stock. If the carrier is different than stock it should come with the brake stay.