Author Topic: Laeger Narrow No-link Build (Read 14609 times)

zcarlson12 · « **on:** July 27, 2013, 04:53:55 PM »

Almost done now but I thought I'd start a new thread on .org as well. Some background on it:

Laeger narrow front frame, +2 a-arms, no-link swingarm, steering stem
Brand new rear bearing carrier with Nacs brake stay
Brand new tie rods and ends
PEP ZPS front shocks and Custom Axis rear shock
AC racing pro-pegs for the frame
ESR 310 with fresh top end on 72.25 bore and race gas dome
LRD team B pipe and silencer
Brand new OEM fibers, plates and springs
Brand new HotRods new style crank
Brand new bearings and seals in entire motor
Brand new ASI radiator hoses
38mm TMX carb
Brand new Boyesen rad valve
LT500 boot to stock airbox for now, fabricating a custom aluminum one soon
Brand new sprockets and chain
Brand new white plastics coming soon
Brand new Ceet gripper 250r cover
Motofool 250r graphics just waiting on plastic
Holeshot MXR6's all the way around on ITP rims, getting some GNCC's soon
Some other stuff here and there but you get the idea. I've been wanting to build this quad since I was about 10 years old and now it's coming alive. There are still a lot of details to be finished up like going back over everything and making sure everything is tight as well as other parts to put on but I can't wait to ride it. Thanks for looking!

ytman · « **Reply #1 on:** July 28, 2013, 05:04:47 AM »

That's beautiful zcarlson12. With the shock offset like that you have a lot more room for the intake tract. I didn't realize the no link Laeger was like that. *****en.
..........oops...I didn't realize you can't say *****en. How about...sweet.

Dustinshuler · « **Reply #2 on:** July 28, 2013, 08:54:03 AM »

Nice chassis! It used to be mine and was really nice. Good to see it went to a good home.

zcarlson12 · « **Reply #3 on:** July 28, 2013, 10:03:12 AM »

Thanks everyone so far! YT- ya I think it should work well with the longer LT boot. Dustin- It is a very nice chassis! I got it, the swingarm, rear shock, and nerfs from Steve (good dude). Can you give me any background on it? Year? Raced? Thanks!

05450r · « **Reply #4 on:** July 28, 2013, 11:34:05 AM »

Looks good! We are going to need a Laeger section before too long,lots of nice ones being built!

supernutt · « **Reply #5 on:** July 29, 2013, 07:12:15 PM »

Very nice!!!

zcarlson12 · « **Reply #6 on:** July 29, 2013, 09:38:43 PM »

Thanks 05 and super. I had a note in my mailbox that I have a couple packages at the office. I can't remember what I bought but I hope it's a pipe, air filter, plugs and some fluids lol.

Tbone07 · « **Reply #7 on:** July 30, 2013, 08:38:59 AM »

She is lookin very good dude. Two no-link Laegers on this site now! (that I know of)

etccb · « **Reply #8 on:** July 30, 2013, 01:44:49 PM »

Looking real good. Keep the pics updated.

zcarlson12 · « **Reply #9 on:** July 30, 2013, 03:24:58 PM »

Thanks Tbone and etccb. I will add some more pics after this weekend. I should be pretty close to firing it up and doing break in early next week. Hopefully sooner because I can't wait to see how this thing rides!

zcarlson12 · « **Reply #10 on:** August 09, 2013, 08:17:58 PM »

Update: All fluids in but ran into an issue on getting my LRD pipe on. I'm going to have to take the right tie rod off to get it on but no big deal. I got my airbox situation figured out and its on the way here as well as a airboot, plastics and seat. Only thing left besides that is the final checks and re-checks before I start it. I do have a question about the wiring harness. Does anyone have a pic from over the engine looking down at how all of the wiring is ran? Or any pics from the cdi to the spark plug area? I got in a hurry taking it all apart and I didn't remember to take a couple pics of the way it all went together.

jamieg45 · « **Reply #11 on:** August 10, 2013, 09:37:09 AM »

Looks good man and what wiring are you running, stock or cr250 set up.

zcarlson12 · « **Reply #12 on:** August 10, 2013, 09:46:39 AM »

Just the stock setup. I just want to make sure I have everything in the right place and plugged in correctly so I'm not kicking this thing for an hour wondering why it's not starting haha.

05450r · « **Reply #13 on:** August 10, 2013, 10:19:10 AM »

Sounds like its moving along nicely,keep it up!!

zcarlson12 · « **Reply #14 on:** August 10, 2013, 10:53:21 AM »

Thanks guys! Jamie- it's the stock set up. Going out there right now to mess with it some more and get the pipe on.