Author Topic: Laeger protrax replacement parts (Read 7290 times)

sgb318 · « **Reply #15 on:** January 01, 2016, 07:33:15 PM »

I'm Isf racing, I do have 4 ready to go minus the one seal, I should find out how much longer it will be on it Monday. I ordered them 6 weeks ago. I also have a arm bushing and sleeves ready to go as well.

Thanks!
Steve

sgb318 · « **Reply #16 on:** January 03, 2016, 09:19:51 AM »

These are the kit, clips, retainer rings and o rings not in the pic

Thanks!
Steve

havinnoj · « **Reply #17 on:** January 03, 2016, 10:12:45 AM »

[MENTION=1084]sgb318[/MENTION] - would you mind posting that up in the p/n rebuild thread for future reference there as well?

zcarlson12 · « **Reply #18 on:** January 03, 2016, 11:38:00 AM »

[MENTION=1084]sgb318[/MENTION] is a great guy to deal with. Just got some of his shrouds and they are well built.

Langbolt · « **Reply #19 on:** January 03, 2016, 12:00:26 PM »

Quote from: jcs003;62519

i do, because some of the part numbers in the thread above dont seem correct. thank you,

john

Hey John, What part numbers are incorrect ? Let me know so I can revise the Thread....Thanks.

jcs003 · « **Reply #20 on:** January 03, 2016, 03:50:33 PM »

Quote from: Langbolt;62815

Hey John, What part numbers are incorrect ? Let me know so I can revise the Thread....Thanks.

the mono ball part numbers take you directly to the o-ring section. thank you,

john

jcs003 · « **Reply #21 on:** January 03, 2016, 04:00:34 PM »

Quote from: sgb318;62728

I'm Isf racing, I do have 4 ready to go minus the one seal, I should find out how much longer it will be on it Monday. I ordered them 6 weeks ago. I also have a arm bushing and sleeves ready to go as well.

Thanks!
Steve

$330 for a complete rebuild kit?

john

sgb318 · « **Reply #22 on:** January 03, 2016, 06:38:04 PM »

Yes for the complete kit,
4-spherical bearings
2-thrust bearings
2-needle bearings
8-bronze bushings
2-left and 2- right rid ends with jam nuts
4- retainer clips
All orings including the ones for the aluminum spacers

Thanks!
Steve

jcs003 · « **Reply #23 on:** January 04, 2016, 05:25:06 AM »

Quote from: sgb318;62837

Yes for the complete kit,
4-spherical bearings
2-thrust bearings
2-needle bearings
8-bronze bushings
2-left and 2- right rid ends with jam nuts
4- retainer clips
All orings including the ones for the aluminum spacers

Thanks!
Steve

Steve,

I am interested in a kit. how do you take payment?

Thank you,

John

Langbolt · « **Reply #24 on:** January 04, 2016, 12:47:45 PM »

Quote from: jcs003;62830

the mono ball part numbers take you directly to the o-ring section. thank you,

john

ok, I've Added the Mono Ball Part#'s and link to see pricing....That other link was for the O-rings that went on either side of the Mono Ball to keep the dirt out.

Thanks John