TRX250r.org

Author Topic: bills championship winning 250R (run down on set up)?  (Read 8358 times)

Offline Victork

bills championship winning 250R (run down on set up)?
« on: July 30, 2013, 05:42:32 PM »
Arlan, if you have a chance, id love to hear all the details on bills R. The one that went mia that is. Not sure you come in here but ill give it a shot.

Offline corvetteZ06

bills championship winning 250R (run down on set up)?
« Reply #1 on: July 31, 2013, 09:38:16 PM »
Great question! I would love to know the same!!

Offline Tbone07

bills championship winning 250R (run down on set up)?
« Reply #2 on: August 08, 2013, 08:57:09 AM »
I'm assuming we are talking about Bill Ballance here? If so I would love to hear about the old school XC 250R setups that Arlan developed.
LED Performance 350 Sphynx - XC Machine
Laeger's-Roll-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline Victork

bills championship winning 250R (run down on set up)?
« Reply #3 on: August 09, 2013, 04:10:31 AM »
Yea the one and only bill ballance

Offline Tbone07

bills championship winning 250R (run down on set up)?
« Reply #4 on: September 13, 2013, 02:22:38 PM »
Arlan,

Any cool info you'd be willing to share about Bill Ballance's old machines?!?!
LED Performance 350 Sphynx - XC Machine
Laeger's-Roll-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline HAYESTRX250R

bills championship winning 250R (run down on set up)?
« Reply #5 on: September 16, 2013, 01:59:45 PM »
Subscribed

Offline 05450r

bills championship winning 250R (run down on set up)?
« Reply #6 on: September 16, 2013, 03:08:18 PM »
I can tell you I owned one of Ballances Lrd aluminum Crf hybrid frames for awhile,seriel number 0001. I believe I sold it to an ice racer up north
04 450r XC
LNP Like New Parts Powder Coating

Offline ledperformance

bills championship winning 250R (run down on set up)?
« Reply #7 on: October 16, 2013, 05:18:03 PM »
Here is an old magazine article on Bill Balance's bike.



Offline Hawaiiysr

bills championship winning 250R (run down on set up)?
« Reply #8 on: October 16, 2013, 07:34:57 PM »
So can we still get that same engine built for under $1000 as the caption states?:)

Offline ledperformance

bills championship winning 250R (run down on set up)?
« Reply #9 on: October 16, 2013, 11:16:43 PM »
The cost of the doing this kit today with all needed parts and labor is $1148.00. This includes top end gaskets, o-rings spacer plate, long base studs, piston, sleeving, porting and reshaped head.
If however there is interest in this kit I would offer it for $999.95 through February of 2014. We have actually made some improvements since this article written.

Offline fx4pitrone

bills championship winning 250R (run down on set up)?
« Reply #10 on: November 22, 2013, 10:29:09 AM »
Curious to hear more about the improvements made on this kit.  Any other mods needed for this kit?  Recommended set ups to use?  I'd like to hear more about this...anyone on here have this set up now?

Offline pinned250r

bills championship winning 250R (run down on set up)?
« Reply #11 on: November 22, 2013, 11:22:56 AM »
Fun thread!!!
I ride PINNED! Therefore, no bdt in this household.

Offline tretimit16

bills championship winning 250R (run down on set up)?
« Reply #12 on: November 22, 2013, 08:54:27 PM »
I inquired about this cylinder a couple years ago and Arlen you had emailed me the dyno specs on this cylinder. If  you still have them it would be pretty cool to see again.

Offline Hawaiiysr

bills championship winning 250R (run down on set up)?
« Reply #13 on: November 22, 2013, 11:39:14 PM »
I'm sure he has them. All the times. I have called him and asked about specific things and he says, hold on let me see... OK ya here you go and give me what ever info I am inquiring about. This guy keeps notes

Offline tretimit16

bills championship winning 250R (run down on set up)?
« Reply #14 on: November 23, 2013, 09:05:30 AM »
Yea I figured he would. Everytime Ive email him he replies promtly and informatively about his products. I was thinkin and I might of been wrong the info he sent me may have been on the 350pv. I inqiured about a few so it hard to remembed. Either way this cylinder is pretty cool I have sparks 300 I need redone and I think Arlen will be the man. Just don't want to waste your time until I have the money. Hopefully after the holidays.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38