Author Topic: Trx310r / 450r (Read 9372 times)

DAVEROCK310R · « **on:** August 11, 2016, 02:31:10 AM »

Hey guys just thought I'd post up some pics of the quad I traded for a couple months back. I didn't originally build it but I'm making it my own. When I got it 1st gear was junk so I rebuilt the tranny and bottom end and got some new laegers + 2 a arms for it. I will be continuing to build this quad and figured I'd start a thread incase some people have questions on doing a similar build I'd answer anything I could.

before and after pic of motor

sprayed the cases with flat black

what it looked like when I first got it

scored some sweet roll design pegs for a 400ex for $60 that bolt right up!

Langbolt · « **Reply #1 on:** August 11, 2016, 12:58:33 PM »

Looks Great! How is the back of the motor mounted

I don't see a bracket between the swingarm mounts. I do see the lower mount in front of the swingarm....which moves the sprocket forward....Does the chain get tighter/looser as the swingarm goes through it's travel ? Might want to check that....you don't want to snap a chain and mess up those nice cases!!!

DAVEROCK310R · « **Reply #2 on:** August 11, 2016, 02:05:00 PM »

DAVEROCK310R · « **Reply #3 on:** August 11, 2016, 02:07:52 PM »

Quote from: Langbolt;69172

Looks Great! How is the back of the motor mounted I don't see a bracket between the swingarm mounts. I do see the lower mount in front of the swingarm....which moves the sprocket forward....Does the chain get tighter/looser as the swingarm goes through it's travel ? Might want to check that....you don't want to snap a chain and mess up those nice cases!!!

Thanks langbolt! It's got the lower rear mount but it doesn't have the swingarm mount I'm going to try and pick one up to see what I can do. Last weekend I went trail riding and the front sprocket bolt kept loosening up it actually fell off but luckily didn't break or damage cases because I was 20 miles from the truck!

DAVEROCK310R · « **Reply #4 on:** August 11, 2016, 02:14:52 PM »

But the times I went riding before that I never had a problem with the sprocket bolt but when I rebuilt the motor I never loctite the sprocket bolt so I think that's why it backed out I never had it right enough

DAVEROCK310R · « **Reply #5 on:** August 11, 2016, 03:16:50 PM »

DAVEROCK310R · « **Reply #6 on:** August 11, 2016, 03:17:30 PM »

Oops **tight** enough not right enough lol

Skeans1 · « **Reply #7 on:** August 11, 2016, 07:26:51 PM »

Quote from: DAVEROCK310R;69178

Oops **tight** enough not right enough lol

Looks good Dave and welcome to the other side.

jto1 · « **Reply #8 on:** August 12, 2016, 08:47:47 AM »

I remember seeing that quad, came from Peoria, Illinois. LoOks good, and I bet a blast to ride.

DAVEROCK310R · « **Reply #9 on:** August 12, 2016, 11:23:54 AM »

Quote from: Skeans1;69180

Looks good Dave and welcome to the other side.

Thanks!

DAVEROCK310R · « **Reply #10 on:** August 12, 2016, 11:24:44 AM »

Quote from: jto1;69185

I remember seeing that quad, came from Peoria, Illinois. LoOks good, and I bet a blast to ride.

Yep Peoria is right. I'm just north of the border in wisconsin

DAVEROCK310R · « **Reply #11 on:** August 12, 2016, 11:25:45 AM »

And I have a hell of alot more fun riding this quad then I did with my banshee

DAVEROCK310R · « **Reply #12 on:** August 13, 2016, 02:24:07 AM »

Little video after getting her back up and running https://youtu.be/ZvmCZxNQ1s8

DAVEROCK310R · « **Reply #13 on:** August 13, 2016, 05:34:12 PM »

Roll Design pegs for 400ex bolted up!!

Sand_Blaster · « **Reply #14 on:** August 16, 2016, 01:23:55 PM »

Very nice hybrid, looks like it was done right.