TRX250r.org

Author Topic: led 363  (Read 3523 times)

Offline DOUGLAS

led 363
« on: November 08, 2017, 07:19:38 PM »
sent my engine out to arlen for a 363 build. hope to finealy assemble my bike through this winter. i could not resist to buy one of tony's engine stands .
« Last Edit: November 08, 2017, 07:56:44 PM by DOUGLAS »
LED 363 87 stock frame

Offline Sand_Blaster

Re: led 363
« Reply #1 on: November 08, 2017, 08:00:09 PM »
Hell Yah that's great to hear!! Did you do a esr 363 or doing a 350 with stroker to make it a 363? Or a sphinx?
87 Trx250r & 99 Banshee

Offline Burns363R

Re: led 363
« Reply #2 on: November 08, 2017, 08:24:30 PM »
ya please tell your complete setup.  Curious to hear what combo you have.  I have a ESR 363 and a ESR 370 non stroker setup.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, 200w OEM Ignition

Offline DOUGLAS

Re: led 363
« Reply #3 on: November 08, 2017, 08:43:14 PM »
going with the 363 esr cylinder that he will be bore and port 38 carb woods trail port. chrome 350 pipe black muffler / stinger i also sent a new cr ignition esr quick change cover polished . i sent him my oem stroker crank that esr had assembled for me. he did not seam to keen on the idea to use my crank. i'm sure i will follow his recomondations. engine cases were powder coated black and then a clear coat thanks to rob wicks (wicked metal design). my cylinder will go out to be polished by dave chitwood ( race reflections). my engine arrived there today after arlen looks it over he will call me to descuss. my engine is an 86 that came out of an atc it never left the showroom floor when they discontinued the atc's this engine was shelfed. i was lucky to get my hands on it.
LED 363 87 stock frame

Offline Sand_Blaster

Re: led 363
« Reply #4 on: November 08, 2017, 10:56:53 PM »
Sounds like it'll look and perform great. Think u could post pictures when it's done?
87 Trx250r & 99 Banshee

Offline DOUGLAS

Re: led 363
« Reply #5 on: November 09, 2017, 05:21:27 AM »
sure will
LED 363 87 stock frame

Offline Sand_Blaster

Re: led 363
« Reply #6 on: December 06, 2017, 10:42:03 PM »
That ur 363 on Arlen's facebook?
87 Trx250r & 99 Banshee

Offline Tbone07

Re: led 363
« Reply #7 on: January 17, 2018, 09:35:24 PM »
@DOUGLAS any updates on this bad boy?
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline F-Red

Re: led 363
« Reply #8 on: January 18, 2018, 01:06:15 PM »
Wise choice Douglas. I spoke with Arlan yesterday at length. He is always willing to talk and divulge. A plethora of information.
Want To See My Wieners?

Offline DOUGLAS

Re: led 363
« Reply #9 on: February 04, 2018, 01:48:29 PM »
its taken some time just before I left for vacation on 02-23-18 arlen called me and said he was ready to assemble but I was missing my water pump. ugh ( thanks to bdt for not giving it back to me }. so I found one on e bay new. I will be calling him tomorrow to see where I am at with this. I am hoping it is ready to be shipped as i have already put a good chunk of change down on it.
LED 363 87 stock frame

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38