Build is coming along. I rebuilt the entire motor, new bearings, and seals after soda blasting it. I put in a hinson basket, and hot rods crank. Still deciding what color to have the frame coated. Just purchased an ESR 330 bolt on that also has been trx7 ported. I could use some suggestions for initial jetting. I have both a 38mm and bored 40.5mm carb to choose from, pump gas, esr intake, boyesen rad valve with new pro series reeds. Right now I have a dog say pipe and see silencer. Running with br8es plug, all electrical is stock other than Ricky stator coil, and I put a bdt adjustable timing plate on. Any helpful ideas welcome, thanks.