TRX250r.org

Author Topic: 2018 XC bike update. Could use some opinions on graphics/plastics  (Read 2976 times)

Offline Tbone07

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #15 on: March 04, 2018, 09:24:16 PM »
The silver plastics could definitely work, but IMO you'll have to change the amount of white in the graphics to something darker. Like a silver/grey/black
LED Performance 350 Sphynx - XC Machine
Laeger's-Roll-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline Burns363R

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #16 on: March 05, 2018, 10:27:26 AM »
Ya I think new graphics are defiantly the better choice, but I already have these printed.  Well see if I put them on or wait to print a new set.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 363R 86- Stock frame(gusseted),KOQ-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, CR Ignition

Offline DOUGLAS

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #17 on: March 05, 2018, 08:30:11 PM »
its only money kyle. 
LED 363 87 stock frame

Offline jcs003

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #18 on: March 06, 2018, 07:23:40 AM »
at this point, you probably should just scrap the whole bike and start over.haha

Offline Burns363R

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #19 on: March 06, 2018, 08:11:19 PM »
The new full bores showed up tonight.  They are not the silver i was expecting.  But honestly i think it will work pretty nice with my build.  I think that the lighter silver will even work with the graphics.  So here goes nothing.

TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 363R 86- Stock frame(gusseted),KOQ-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, CR Ignition

Offline Burns363R

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #20 on: March 06, 2018, 08:12:07 PM »
Also in person the light blue isnt so light in the graphics.  Its considerably darker.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 363R 86- Stock frame(gusseted),KOQ-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, CR Ignition

Offline Tbone07

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #21 on: March 07, 2018, 11:21:19 AM »
Wow I love that silver. IMO it looks way better than the darker shade.

That's gonna look killer
LED Performance 350 Sphynx - XC Machine
Laeger's-Roll-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Online hickwheeler

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #22 on: March 07, 2018, 11:42:45 AM »
So are these brand new fenders from fullbore
88 ESR 330 5mil stroke
88 ct350pv (BOF Build)
Puma coming soon

Offline jcs003

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #23 on: March 07, 2018, 11:45:59 AM »
no matter what fenders or brackets, it will look good beating on 450s

Offline Burns363R

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #24 on: March 07, 2018, 11:50:16 AM »
Yup hot off the press from Full Bore.  They are sitting funny because i need to trim for the 4 gallon tank.  Thanks going to hurt a bit.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 363R 86- Stock frame(gusseted),KOQ-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, CR Ignition

Offline Burns363R

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #25 on: March 07, 2018, 08:26:51 PM »
Graphics are on.  Hope to get them mounted tomorrow.


TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 363R 86- Stock frame(gusseted),KOQ-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, CR Ignition

Offline Tbone07

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #26 on: March 08, 2018, 08:23:25 AM »
Hell ya that looks awesome
LED Performance 350 Sphynx - XC Machine
Laeger's-Roll-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline DOUGLAS

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #27 on: March 08, 2018, 11:46:02 AM »
very nice.
LED 363 87 stock frame

Offline Burns363R

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #28 on: March 10, 2018, 07:17:58 PM »
Well Just need some shamrocks and new tires put on! Although the black rims are growing on me!




TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 363R 86- Stock frame(gusseted),KOQ-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, CR Ignition

Offline Tbone07

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #29 on: March 12, 2018, 10:03:04 AM »
If I didn't have a brand new candy blue Fourwerx hood for Maier/OEM plastics then I think i'd buy a set of these Fullbore plastics. They look awesome.
LED Performance 350 Sphynx - XC Machine
Laeger's-Roll-GThunder-HLS-PEP-HiPer-GBC

RIP Laz