TRX250r.org

Author Topic: 2018 XC bike update. Could use some opinions on graphics/plastics  (Read 8770 times)

Offline Burns363R

Im doing some updating to the 2018 XC bike instead of my usual full overhaul.  I have already purchased the graphics below, I was planning on putting them on White Full Bore plastics.  But some things have changed.

I may have come into a set of my signature silver full bores that are full fender that i will be able to run on my XC bike.   The question is will the color scheme look any good on my Silver plastics blue frame, or should i start completely over on graphics?

New XC graphics




Current XC Graphics





Here are the current silver fullbores on my MX bike.  I could match these graphics if i wanted to start over and buy new graphics.

TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, 200w OEM Ignition

Offline Hawaiiysr

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #1 on: February 27, 2018, 11:11:26 AM »
I think it will work nicely with silver

Offline hickwheeler

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #2 on: February 27, 2018, 12:20:00 PM »
I think it will work
88 hybrid 431 puma
88 (BOF Build) stock motor and oem 89 plastics
More in the works

Offline jcs003

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #3 on: February 27, 2018, 12:34:50 PM »
i think it will be a nice look.  the blues will work well with the silver.  it will have an arctic look.

Offline croat1

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #4 on: February 27, 2018, 01:06:16 PM »
I think the graphics will look good on Silver Fullbores. 

Joe

Offline Tbone07

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #5 on: March 02, 2018, 10:37:28 AM »
Come on you guys are gonna make me be the only asshole...... :D

I think they'll look much better on the white plastics. There's too much white in the graphics and I definitely think they'll end up looking like "stickers" as opposed to painted on graphics. They won't necessarily blend with the silver
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline havinnoj

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #6 on: March 02, 2018, 12:28:33 PM »
Love the color / graphic scheme on the MX bike @Burns363R!  If you pick up another set of silver fenders, then I think removing some of the white on the XC graphics would be best.

Offline DOUGLAS

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #7 on: March 02, 2018, 05:37:44 PM »
man you have the best sh.. . no mater what many will be drooling over your bike.
LED 363 87 stock frame

Offline Burns363R

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #8 on: March 02, 2018, 09:08:16 PM »
Thanks Douglas!


So for those nay sayers.  Do you think if I duplicate my MX graphics on the XC bike, will that look good?
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, 200w OEM Ignition

Offline Sand_Blaster

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #9 on: March 02, 2018, 11:11:52 PM »
I personally like the white Fullbores vs gray.
87 Trx250r & 99 Banshee

Offline Hawgpilot

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #10 on: March 03, 2018, 12:22:38 AM »
You asked so I'll give my opinion:  Both will look great!  I do think I like the white best, but I always prefer a white canvas. However, the wheels on the blue quad must go.

Again, my .02

Offline Burns363R

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #11 on: March 03, 2018, 09:44:17 PM »
Well the silver plastics are my thing.  Its my look, but i think im going to copy the MX graphics....
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, 200w OEM Ignition

Offline Blackburn250R

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #12 on: March 03, 2018, 09:48:52 PM »
I've never been a huge fan of the silver, but your previous setup looked great.  That being said, I'd choose the white plastic...but I'm wishing I had white, as I currently ride red full bore plastic.  All of the anodized blue I'm picking up would look better with white.  1 more vote for white.

Offline hickwheeler

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #13 on: March 03, 2018, 10:41:15 PM »
Well the silver plastics are my thing.  Its my look, but i think im going to copy the MX graphics....
That definitely looks good
88 hybrid 431 puma
88 (BOF Build) stock motor and oem 89 plastics
More in the works

Offline havinnoj

Re: 2018 XC bike update. Could use some opinions on graphics/plastics
« Reply #14 on: March 04, 2018, 01:37:04 AM »
Well the silver plastics are my thing.  Its my look, but i think im going to copy the MX graphics....

I like that idea.  Maybe experiment with throwing in a little more black in the graphics.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38