TRX250r.org

Author Topic: Round2six7xc  (Read 936 times)

Offline bnau267

Round2six7xc
« on: March 18, 2018, 09:26:07 PM »
Say hello to my XC bottom.  Its a Kody Schorr built engine with his full billet tranny.

Im in no hurry and theres no timeline but this bad boy will sing someday.




Offline DOUGLAS

Re: Round2six7xc
« Reply #1 on: March 18, 2018, 09:42:53 PM »
educate me who is Kody Schoor ? don't laugh at me I just don't know who he is.
LED 363 87 stock frame

Offline bnau267

Re: Round2six7xc
« Reply #2 on: March 18, 2018, 10:13:04 PM »
Hes the guy out in Tower City that used to wrench for Tony Kellner behind the scenes back in the Hawk days.  Hes pretty much the go to guy for a R bottom end....or anything r for that matter.  Hes not big on FB or the internet.

Online hickwheeler

Re: Round2six7xc
« Reply #3 on: March 18, 2018, 10:17:07 PM »
Isn't he the one actually making the billet gears. That Eddie and Arlan sell
88 330 worked over by Pete
88 ct350pv (BOF Build)
89 440 Packard built pilot  (Sold)

Offline bnau267

Re: Round2six7xc
« Reply #4 on: March 18, 2018, 10:27:23 PM »
Yeah hes the one who got it started...  he had a local guy race his frontline r chassis all last year.  Gears were hammered on and worked flawless.

Offline havinnoj

Re: Round2six7xc
« Reply #5 on: March 19, 2018, 01:53:10 AM »
So the top end is a 276?

Yeah hes the one who got it started...  he had a local guy race his frontline r chassis all last year.  Gears were hammered on and worked flawless.

Yeah Id love to see how these wear in high hp drag applications.  The billet McCoy ones wore pretty quickly. 

Offline Tbone07

Re: Round2six7xc
« Reply #6 on: March 19, 2018, 08:43:53 AM »
So you got rid of all your Laeger stuff that this engine could go in? Still waiting on that Walsh too? Lol
LED Performance 350 Sphynx - XC Machine
Laeger's-Roll-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline etccb

Re: Round2six7xc
« Reply #7 on: March 19, 2018, 10:16:22 AM »
So the top end is a 276?

Yeah hes the one who got it started...  he had a local guy race his frontline r chassis all last year.  Gears were hammered on and worked flawless.

Yeah Id love to see how these wear in high hp drag applications.  The billet McCoy ones wore pretty quickly. 

It might be the same place that truly made them both as they have made some sort of drag gears before for sure. They had someone that makes gears make these. I don't recall the name but you have to buy them from esr, led or schoor. Esr, led and schoor money and quantity orders is what gets the gear runs done.

Offline bnau267

Re: Round2six7xc
« Reply #8 on: March 21, 2018, 11:30:14 PM »
walsh or isf whichever comes first.  i'm kinda into the ltr and ktm for the most part so i sold a lot of my r stuff.  i have a decent amount of key parts laying around to be active though...  just waiting on a frame.