TRX250r.org

Author Topic: Chain Sliders, Rollers, Rub Blocks  (Read 1302 times)

Online havinnoj

Chain Sliders, Rollers, Rub Blocks
« on: April 16, 2018, 11:37:45 PM »
Never really though too much about these - usually grabbed UPP stuff and has worked well in the sand.  Have a couple TM swingarm sliders - also nice.  Whatís everyone prefer for sliders, rollers, and that little rub block/slider?

Offline The norm

Re: Chain Sliders, Rollers, Rub Blocks
« Reply #1 on: April 17, 2018, 12:50:30 AM »
Never really though too much about these - usually grabbed UPP stuff and has worked well in the sand.  Have a couple TM swingarm sliders - also nice.  Whatís everyone prefer for sliders, rollers, and that little rub block/slider?
I use TM sliders and TM rub block on the frame
I had a BDT motor once.....It SUCKED!
Currently: Hybrid Engineering 310 stroker built by Pete

Offline broken1

Re: Chain Sliders, Rollers, Rub Blocks
« Reply #2 on: April 17, 2018, 01:17:31 AM »
I use oem sliders & they seem to hold up pretty good in the sand to. The rollers & rub blocks on both R's are whatever I could find that was cheapest.
overkill is an often underrated achievement

Offline jcs003

Re: Chain Sliders, Rollers, Rub Blocks
« Reply #3 on: April 17, 2018, 06:45:30 AM »
I use TM, but have made custom to utilize the material that has better wear characteristics.

Offline rablack21

Re: Chain Sliders, Rollers, Rub Blocks
« Reply #4 on: April 17, 2018, 07:47:26 AM »
I use whatever I can find also. Lol. Currently using tm stuff. Maybe I should make my own. Nothing difficult about this stuff.

Offline Tbone07

Re: Chain Sliders, Rollers, Rub Blocks
« Reply #5 on: April 17, 2018, 08:26:15 AM »
I had to grab a UPP case saver awhile back so I went with all UPP stuff. I think it's a bit softer than the TM units i've had previously. But no real complaints so far
LED Performance 350 Sphynx - XC Machine
Laeger's-Roll-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Online havinnoj

Re: Chain Sliders, Rollers, Rub Blocks
« Reply #6 on: April 17, 2018, 11:28:09 AM »
Thanks guys. Can you still get the OEM lower rub block (piece that goes behind the sprocket, under the swingarm)?
« Last Edit: April 17, 2018, 11:57:16 AM by havinnoj »

Offline jwraymond6

Re: Chain Sliders, Rollers, Rub Blocks
« Reply #7 on: April 17, 2018, 12:35:03 PM »
Iím a rebel I donít use anything lol but have used  TM in the past
87 363 sphynx built by Pete @ hybrid engineering

Offline Sand_Blaster

87 Trx250r & 99 Banshee

Offline broken1

Re: Chain Sliders, Rollers, Rub Blocks
« Reply #9 on: April 17, 2018, 02:03:27 PM »
Thanks guys. Can you still get the OEM lower rub block (piece that goes behind the sprocket, under the swingarm)?

Unfortunately those OEM rub blocks are another part Honda added to their discontinued list... I think the one's I got are Moose & they were only $13 at DTR.
overkill is an often underrated achievement